✦ LIBER ✦

The uniformity of the electrical resistance of evaporated nickel-chromium thin films on glazed Al2O3 substrate

✍ Scribed by I. Beinglass; V. Vinikman; A. Samuel

Publisher: Elsevier Science
Year: 1973
Tongue: English
Weight: 518 KB
Volume: 18
Category: Article
ISSN: 0022-0248
DOI: 10.1016/0022-0248(73)90200-5

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

On the electrical resistivity of thin ni

On the electrical resistivity of thin nickel films

✍ Joel S. Hirschhorn 📂 Article 📅 1962 🏛 Elsevier Science 🌐 English ⚖ 308 KB

Effect of substrate temperature on the p

Effect of substrate temperature on the properties of vacuum evaporated indium selenide thin films

✍ C. Viswanathan; V. Senthilkumar; R. Sriranjini; D. Mangalaraj; Sa. K. Narayandas 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 236 KB 👁 3 views

Thin films of InSe were obtained by thermal evaporation techniques on glass substrates maintained at various temperatures (T sb = 30°, 400°C). X-ray diffraction analysis showed the occurrence of amorphous to polycrystalline transformation in the films deposited at higher substrate temperature (400°C

The Effect of Oxygen on the Optical Prop

The Effect of Oxygen on the Optical Properties of Al2O3 Thin Films

✍ Dr.-Ing. W. Both; Dr. rer. nat. T. Jung; Dipl.-Ing. L. Eichhorn 📂 Article 📅 1986 🏛 John Wiley and Sons 🌐 English ⚖ 179 KB 👁 2 views

The effects of substrate surface steps o

The effects of substrate surface steps on the microstructure of epitaxial Ba2YCu3O7−x thin films on (001) LaAlO3

✍ P.C. McIntyre; M.J. Cima; A. Roshko 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 915 KB

The influence of the surface roughness o

The influence of the surface roughness of the substrates on the surface morphology of YBa2Cu3O7-x thin films

✍ C.C. Chin; T. Morishita; T. Sugimoto 📂 Article 📅 1993 🏛 Elsevier Science 🌐 English ⚖ 861 KB

Influence of the substrate temperature o

Influence of the substrate temperature on the structural, optical, and electrical properties of tin selenide thin films deposited by thermal evaporation method

✍ N. Kumar; V. Sharma; N. Padha; N. M. Shah; M. S. Desai; C. J. Panchal; I. Yu. Pr 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 291 KB 👁 2 views

Thin films of tin selenide (SnSe) were deposited on sodalime glass substrates, which were held at different temperatures in the range of 350-550 K, from the pulverized compound material using thermal evaporation method. The effect of substrate temperature (T s ) on the structural, morphological, opt