𝔖 Bobbio Scriptorium
✦   LIBER   ✦

The thermal shock resistance of the ZrB2–SiC–ZrC ceramic

✍ Scribed by Wang Zhi; Qu Qiang; Wu Zhanjun; Shi Guodong


Publisher
Elsevier Science
Year
2011
Weight
980 KB
Volume
32
Category
Article
ISSN
0261-3069

No coin nor oath required. For personal study only.

✦ Synopsis


In the present work, the thermal shock resistance of the ZrB 2 -SiC-ZrC ceramic was estimated by the water quenching method and the flexural strength of the quenched specimen was measured. The measured critical temperature difference of the ZrB 2 -SiC-ZrC ceramic was significantly greater than that of the ZrB 2 -15 vol.% SiC ceramic. The improvement in thermal shock resistance was attributed to its higher fracture toughness (6.7 MPa m 1/2 ) and lower flexural strength (526 MPa) relative to the ZrB 2 -15 vol.% SiC ceramic (4.1 MPa m 1/2 and 795 MPa) based on Griffith fracture criterion. Furthermore, the temperature and thermal stress distributions in the specimen during instantaneous water quenching were simulated by Finite element analysis.


📜 SIMILAR VOLUMES


Effect of carbon nanotubes on the proper
✍ Wu-Bian Tian; Yan-Mei Kan; Guo-Jun Zhang; Pei-Ling Wang 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 847 KB

ZrB2–20vol%SiC ceramics without and with additive of 2wt% carbon nanotubes (CNTs) were fabricated by hot-pressing at 1900°C for 1h under 30MPa using ZrB2, SiC and CNTs as starting materials. The fracture toughness increased about 15%, but hardness, flexural strength as well as thermal conductivity d

Influence of nanosized SiC particle on t
✍ Mengran Cao; Shubin Wang; Wenbo Han 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 690 KB

ZrB 2 -based nanocomposite ceramics, which were enforced by nanosized SiC particles with the sizes of 100 and 20 nm, respectively, were prepared by spark plasma sintering. Both mass fraction and size of the nanosized SiC particle have a great effect on the relative density and fracture toughness of