✦ LIBER ✦

The thermal problem of friction during braking for a three-element tribosystem with a composite pad

✍ Scribed by Michal Kuciej

Book ID: 113643260
Publisher: Elsevier Science
Year: 2011
Tongue: English
Weight: 951 KB
Volume: 38
Category: Article
ISSN: 0735-1933
DOI: 10.1016/j.icheatmasstransfer.2011.08.005

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

The thermal problem of friction for a th

The thermal problem of friction for a three-element tribosystem with composite strip

✍ A.A. Yevtushenko; M. Kuciej 📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 552 KB

Filament equilibrium with allowance for

Filament equilibrium with allowance for friction during the chord winding of composite discs

✍ P. A. Moorlat; G. G. Portnov; L. N. Seleznev 📂 Article 📅 1983 🏛 Springer US 🌐 English ⚖ 396 KB

The three-dimensional problem of thermoe

The three-dimensional problem of thermoelasticity for a body with a thermally insulated internal round crack

✍ O. V. Poberezhnyi 📂 Article 📅 1975 🏛 Springer 🌐 English ⚖ 132 KB

A boundary element procedure for estimat

A boundary element procedure for estimating the residual fatigue life of three dimensional crack problem under cyclic loadings with varying amplitudes

✍ Feng Wei; Zhang Yong-Yuan 📂 Article 📅 1988 🏛 Elsevier Science 🌐 English ⚖ 370 KB

A p-version finite element approach for

A p-version finite element approach for two- and three-dimensional problems of the J2 flow theory with non-linear isotropic hardening

✍ A. Düster; E. Rank 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 954 KB

## Abstract In this paper an implementation of a two‐ and three‐dimensional __p__‐version approach to the __J__~2~ flow theory with non‐linear isotropic hardening for small displacements and small strains is presented. Based on higher‐order quadrilateral and hexahedral element formulations, a Newto

Oxygen interaction of CdS-based gas sens

Oxygen interaction of CdS-based gas sensors with different stoichiometric compositions was studied by X-ray photoelectron spectroscopy (XPS) and thermal-desorption mass spectroscopy observations combined with conductivity measurements. Three different types of film with different atomic ratios of Cd/S were used in the study of oxygen chemisorption in a low-temperature range between 300 and 570 K. Spray pyrolysis was used for the deposition of the films on glass substrates; XPS and energy dispersive spectroscopy of X-ray together with atomic force microscopy and scanning electron microscopy were used for the characterization of the composition and structure of the films. It was possible to distinguish different temperature ranges for the thermal desorption of the different adsorbed oxygen species. A comparison of the data from XPS and mass-spectroscopy observations with conductance measurements allows to conclude that metallic surface atoms are responsible for different interactions of oxygen species with CdS surfaces.

📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 379 KB