Abstract
In this article, we have aimed to mechanically characterize the nylon 6 single nanofiber and nanofiber mats. We have started by providing a critical review of the developed mechanical characterization testing methods of single nanofiber. It has been found that the tensile test method provides information about the mechanical properties of the nanofiber such as tensile strength, elastic modulus and strain at break. We have carried out a tensile test for nanofiber/composite MWCNTs nanofiber mats to further characterize the effect of the MWCNTs filling fiber architecture. In addition, we have designed and implemented a novel simple laboratory setβup for performing tensile test of single nanofibers. As a result, we have established the stressβstrain curve for single nylon 6 nanofibers allowing us to define the tensile strength, axial tensile modulus and ultimate strain of this nanofiber. The compared values of the tensile strength, axial modulus and ultimate strain for nylon 6 nanofiber with those of conventional nylon 6 microfiber have indicated that some of the nylon 6 nanofiber molecule chains have not been oriented well along the nanofiber axis during electrospinning and through the alignment mechanism. Finally, we have explained how we can improve the mechanical properties of nylon 6 nanofibers and discussed how to overcome the tensile testing challenges of single nanofibers. Β© 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1719β1731, 2010