✦ LIBER ✦

The solution of a problem in contact fracture mechanics on the nucleation and development of a bridged crack in the hub of a friction pair

✍ Scribed by V.M. Mirsalimov

Publisher: Elsevier Science
Year: 2007
Tongue: English
Weight: 458 KB
Volume: 71
Category: Article
ISSN: 0021-8928
DOI: 10.1016/j.jappmathmech.2007.03.003

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Simulation of friction and wear in the c

Simulation of friction and wear in the contact between the valve bridge and rocker arm pad in a cam mechanism

✍ Christer Spiegelberg; Sören Andersson 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 684 KB

In this paper the surface velocities obtained from a rigid body model are used to simulate friction and wear in the contact between the rocker arm pad and valve bridge in the cam mechanism of a diesel engine. The friction is simulated with two different friction models, a 3D brush model capable of h

How to tackle the compatibility constrai

How to tackle the compatibility constraints in a computational solution of frictional contact problem

✍ Boris Štok; Aleš Hudoklin 📂 Article 📅 1994 🏛 Elsevier Science 🌐 English ⚖ 479 KB

Self-similar solution of the plane probl

✍ E.V. Teodorovich 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 238 KB

The plane problem of the evolution of a hydraulic fracture crack in an elastic medium is considered. It is established that a self-similar solution is only possible at a constant rate of fluid injection. The solution for the value of the crack opening is presented in the form of a series expansion i

A crack at the interface of anisotropic

A crack at the interface of anisotropic bodies. Singularities of the elastic fields and a criterion for fracture when the crack surfaces are in contact

✍ S.A. Nazarov 📂 Article 📅 2005 🏛 Elsevier Science 🌐 English ⚖ 901 KB

Novozhilov'.s quasistatic brittle fracture criterion is used to determine the direction angle of the branch of a crack with closed surfaces at the interface of two anisotropic bodies. The asymptotic form of the elastic fields near the crack tip is investigated and corollaries of Novozhilov's criteri

The calculation of the energy losses in

The calculation of the energy losses in a sliding elastic contact with friction and wear (the plane problem)

✍ I.A. Soldatenkov 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 347 KB

The plane problem of the sliding contact of a punch with an elastic foundation when there is friction and wear is considered. Assuming the existence of a steady solution in a moving system of coordinates, relations are derived between the sliding velocity, the wear, the contact stresses and the disp

On the solution of the two-dimensional p

On the solution of the two-dimensional problem of a plane crack of arbitrary shape in an anisotropic material

✍ E.G. Ladopoulos 📂 Article 📅 1987 🏛 Elsevier Science 🌐 English ⚖ 636 KB

In the present report we investigate the formulae of the stress field in the neighbourhood of a plane crack of arbitrary shape in an anisotropic material for the twodimensional case. Moreover we consider the expression of the stress field in the neighbourhood of a plane crack in a transversely isotr