𝔖 Bobbio Scriptorium
✦   LIBER   ✦

The relationships between morphology, irradiation and the ductile-brittle transition of isotactic polypropylene

✍ Scribed by Zhang, X C; Butler, M F; Cameron, R E


Publisher
John Wiley and Sons
Year
1999
Tongue
English
Weight
119 KB
Volume
48
Category
Article
ISSN
0959-8103

No coin nor oath required. For personal study only.

✦ Synopsis


The effect of the morphology of polypropylene, as controlled by annealing, on the material's micro-mechanical response before and after irradiation is explored using simultaneous SAXS/tensile deformation experiments. Morphology moderates the effects of cross-linking and scission on the deformation behaviour. The micro-mechanisms of deformation can be related to these morphological and chemical changes. It appears that a high tie-chain density and a low crystal thickness, which may be achieved by crystallisation at low temperatures, will encourage resistance to mechanical property deterioration under irradiation.


📜 SIMILAR VOLUMES


The morphology of irradiated isotactic p
✍ X. C. Zhang; R. E. Cameron 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 301 KB 👁 1 views

The research in this article explores the response of semicrystalline isotactic polypropylene to gamma radiation in air, and relates the morphological changes of the polymer to corresponding changes in mechanical properties. The effect of the initial morphology of the polymer on its response to irra

Effects of strain rate and comonomer on
✍ Souheng Wu 📂 Article 📅 1976 🏛 John Wiley and Sons 🌐 English ⚖ 300 KB 👁 2 views

The effect of rate on the brittle-ductile transition of polymers can be given by an Arrheniustype equation with activation energy between those of 01 and p transitions and given by where Eb is the activation energy for brittle-ductile transition, E , is that for a transition, Ep is that for / 3 tran

Relationship between the network morphol
✍ Exequiel Rodriguez; Maider Larrañaga; Iñaki Mondragón; Analía Vázquez 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 233 KB

## Abstract Two commercial vinyl ester resins, Derakane 411‐350 (resin D) and Derakane 411‐350 Momentum (resin M), were characterized. Despite the large quantity of publications in the literature about vinyl ester resins, few experimental results have been reported for resin M. The effect of the st