✦ LIBER ✦

The problem of calibration of specimens for liquid-penetrant testing

✍ Scribed by Yu. A. Glazkov

Publisher: SP MAIK Nauka/Interperiodica
Year: 2004
Tongue: English
Weight: 56 KB
Volume: 40
Category: Article
ISSN: 1061-8309
DOI: 10.1007/s11181-004-0009-1

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

The problem of calibration of specimens

The problem of calibration of specimens for liquid-penetrant testing

✍ Yu. A. Glazkov 📂 Article 📅 2004 🏛 SP MAIK Nauka/Interperiodica 🌐 English ⚖ 54 KB

Peculiarities of the Certification of Re

Peculiarities of the Certification of Reference Specimens for Liquid-Penetrant Testing

✍ Yu. A. Glazkov 📂 Article 📅 2004 🏛 SP MAIK Nauka/Interperiodica 🌐 English ⚖ 116 KB

Peculiarities of the certification of re

Peculiarities of the certification of reference specimens for liquid-penetrant testing

✍ Yu. A. Glazkov 📂 Article 📅 2004 🏛 SP MAIK Nauka/Interperiodica 🌐 English ⚖ 115 KB

The mechanism of aging of reference spec

The mechanism of aging of reference specimens for penetrant nondestructive testing: Part II. Effects of oxidation and corrosion of metal on aging of specimens

✍ Yu. A. Glazkov 📂 Article 📅 2005 🏛 SP MAIK Nauka/Interperiodica 🌐 English ⚖ 68 KB

Some problems with the calibration of su

Some problems with the calibration of surface roughness reference specimens

✍ Paul Rubert 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 291 KB

Compliance calibration of the short rod

Compliance calibration of the short rod chevron-notch specimen for fracture toughness testing of brittle materials

✍ R. T. Bubsey; D. Munz; W. S. Pierce; J. L. Shannon 📂 Article 📅 1982 🏛 Springer Netherlands 🌐 English ⚖ 655 KB

The short rod chevron-notch specimen has the advantages of (1) crack development at the chevron tip during the early stage of test loading and (2) convenient calculation of Ktc from the maximum test load and a calibration factor which depends only on the specimen geometry and manner of loading. For