𝔖 Bobbio Scriptorium
✦   LIBER   ✦

The preparation of poly(glycidyl acrylate)–polypyrrole gel-electrolyte and its application in dye-sensitized solar cells

✍ Scribed by Ziying Tang; Jihuai Wu; Qinghua Li; Zhang Lan; Leqing Fan; Jianming Lin; Miaoliang Huang

Publisher
Elsevier Science
Year
2010
Tongue
English
Weight
855 KB
Volume
55
Category
Article
ISSN
0013-4686

No coin nor oath required. For personal study only.

✦ Synopsis

Poly(glycidyl

📜 SIMILAR VOLUMES

Application of poly(acrylic acid-g-gelat
Application of poly(acrylic acid-g-gelatin)/polypyrrole gel electrolyte in flexible quasi-solid-state dye-sensitized solar cell
✍ Qinghua Li; Jihuai Wu; Ziying Tang; Yaoming Xiao; Miaoliang Huang; Jianming Lin 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 556 KB

A novel gel polymer electrolyte based on poly(acrylic acid-g-gelatin)/polypyrrole with conductivity of 14.1 mS cm -1 was prepared. Based on the gel electrolyte, a flexible quasi-solid-state dye-sensitized solar cell was fabricated by using a low-temperature filming technique. Owing to high conductiv

In situ Photopolymerization of a Gel Ion
In situ Photopolymerization of a Gel Ionic Liquid Electrolyte in the Presence of Iodine and Its Use in Dye Sensitized Solar Cells
✍ Orawan Winther-Jensen; Vanessa Armel; Maria Forsyth; Douglas R. MacFarlane 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 246 KB

## Abstract We report for the first time an in situ photopolymerization of model co‐monomers, 2‐hydroxyethyl methacrylate (HEMA) and tetra (ethylene glycol) diacrylate (TEGDA), in an IL electrolyte containing I~2~ for DSSCs. TiO~2~ nanoparticles were used as the photo‐initiator and co‐gelator in a

Preparation of polymer film of micro-por
Preparation of polymer film of micro-porous or island-like structure and its application in dye-sensitized solar cell
✍ Chih-Ming Chen; Han-Sheng Shiu; Sheng-Jye Cherng; Tzu-Chien Wei 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 735 KB

A polystyrene (PS) film of micro-porous or island-like structure has been prepared by spin-coating the PS-PMMA (polymethyl-methacrylate) blend on sputtered platinum electrode, followed by selectively dissolving PMMA out of the blend. The film forms either micro-porous or island-like structure depend