𝔖 Bobbio Scriptorium
✦   LIBER   ✦

The precipitation behaviour in a thermomechanically treated Al-Zn-Mg alloy

✍ Scribed by C. M. Wan; M. T. Jahn; T. Y. Chen; L. Chang

Publisher
Springer
Year
1978
Tongue
English
Weight
489 KB
Volume
13
Category
Article
ISSN
0022-2461

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Plastic flow instability in a precipitat
Plastic flow instability in a precipitation hardened Alξ—ΈZnξ—ΈMg alloy
✍ J. Wood; P.G. McCormick πŸ“‚ Article πŸ“… 1987 πŸ› Elsevier Science βš– 609 KB

A study of the effect of precipitation hardening on the yield behaviour in torsion of an Al-Zn-Mg alloy has been carried out. Two modes of unstable yield behaviour were observed. As-quenched and well over-aged specimens exhibited serrated yielding. Specimens aged at elevated temperatures exhibited

Precipitation process in a cast alloy Al
Precipitation process in a cast alloy Al-3.5 wt.pct Zn-4 wt.pct Mg
✍ Dr. Lecong Dzuong πŸ“‚ Article πŸ“… 1980 πŸ› John Wiley and Sons 🌐 English βš– 372 KB

## Abstract The structural changes during ageing of an alloy containing 3.5 wt.pct Zn and 4 wt.pct Mg were studied by means of transmission electron microscopy. It was shown that the precipitation process in this alloy differs from that in the alloys having high Zn/Mg ratios. The following phases w

The stress corrosion cracking behaviour
The stress corrosion cracking behaviour of heat-treated Al–Zn–Mg–Cu alloy in modified salt spray fog testing
✍ J. OΓ±oro πŸ“‚ Article πŸ“… 2009 πŸ› John Wiley and Sons 🌐 German βš– 295 KB

## Abstract The stress corrosion cracking behaviour of 7075 (Al–Zn–Mg–Cu) alloy have been studied in a salt spray fog chamber with two vapourised aqueous solutions (0 and 5% NaCl). The paper analyses the stress corrosion resistance of 7075 aluminium alloy with several precipitation‐ageing heat trea