𝔖 Bobbio Scriptorium
✦   LIBER   ✦

The porosity of brown-coal char

✍ Scribed by D.G. Evans; J.A. Hermann


Publisher
Elsevier Science
Year
1970
Tongue
English
Weight
522 KB
Volume
49
Category
Article
ISSN
0016-2361

No coin nor oath required. For personal study only.


πŸ“œ SIMILAR VOLUMES


Development of porosity in brown-coal ch
✍ Jerzy Berger; Teresa Siemieniewska; Kazimierz TomkΓ³w πŸ“‚ Article πŸ“… 1976 πŸ› Elsevier Science 🌐 English βš– 765 KB

Two petrographic types of Tertiary brown coals, xylitic and earthy, were carbonized, and activated with carbon dioxide between 1123 and 1273 K. The development of porosity in the activated chars was studied by adsorption of benzene and carbon dioxide at 298 K and by mercury porosimetry. The type of

The adsorption of oxygen on brown coal c
✍ D.J. Allardice πŸ“‚ Article πŸ“… 1966 πŸ› Elsevier Science 🌐 English βš– 763 KB

The adsorption of oxygen on degassed brown coal char has been investigated gravimetrically in the temperature range 25"-200Β°C and at pressures up to 1 atm. The adsorption occurs by two separate processes, one reversible and the other irreversible. Methods have been devised to investigate these proce

The combustion of Loy Yang brown coal ch
✍ B.C. Young; I.W. Smith πŸ“‚ Article πŸ“… 1989 πŸ› Elsevier Science 🌐 English βš– 598 KB

Combustion rate measurements of Loy Yang brown coal char particles (88 #m median size) over the temperature range 940-1420 K yielded a chemical rate coefficient Re, expressed as Re= 12.6 expl-68.3/(RTp)] kg/m2s (kPa 02) Β°.4. Particle size and density decreased with burn off, but in an unusual manne

Activation of brown-coal chars with oxyg
✍ Kazimierz TomkΓ³w; Anna Jankowska; Franciszek Czechowski; Teresa Siemieniewska πŸ“‚ Article πŸ“… 1977 πŸ› Elsevier Science 🌐 English βš– 719 KB

Semicokes and cokes prepared respectively at 773 and 1173 K from brown-coals, xylitic and earthy, from Polish coal seams, were activated with gaseous oxygen (10% oxygen and 90% argon) in a thermogravimetric apparatus to different burn-offs. With increasing temperature of oxygen activation a constant

The processes involved in the adsorption
✍ D.J. Allardice πŸ“‚ Article πŸ“… 1965 πŸ› Elsevier Science 🌐 English βš– 350 KB

CARBON 215 ram was placed in the mold and the assembly compressed and heated according to standard techniques. The result was a Lucite cylinder with graphite flakes imbedded and oriented with their a-axes parallel, and in a plane perpendicular to the axis of the Lucite cylinder. The cylinder was sec