The plastic collapse of sandwich beams with a metallic foam core

✍ Scribed by C. Chen; A-M Harte; N.A. Fleck

• Publisher: Elsevier Science
• Year: 2001
• Tongue: English
• Weight: 323 KB
• Volume: 43
• Category: Article
• ISSN: 0020-7403
• DOI: 10.1016/s0020-7403(00)00069-2

✦ Synopsis

Plastic collapse modes of sandwich beams have been investigated experimentally and theoretically for the case of an aluminium alloy foam with cold-worked aluminium face sheets. Plastic collapse is by three competing mechanisms: face yield, indentation and core shear, with the active mechanism depending upon the choice of geometry and material properties. The collapse loads, as predicted by simple upper bound solutions for a rigid, ideally plastic beam, and by more re"ned "nite element calculations are generally in good agreement with the measured strengths. However, a thickness e!ect of the foam core on the collapse strength is observed for collapse by core shear: the shear strength of the core increases with diminishing core thickness in relation to the cell size. Limit load solutions are used to construct collapse maps, with the beam geometrical parameters as axes. Upon displaying the collapse load for each collapse mechanism, the regimes of dominance of each mechanism and the associate mass of the beam are determined. The map is then used in optimal design by minimising the beam weight for a given structural load index.