𝔖 Bobbio Scriptorium
✦   LIBER   ✦

The perturbation method and the extended finite element method. An application to fracture mechanics problems

✍ Scribed by J. GRASA; J. A. BEA; J. F. RODRÍGUEZ; M. DOBLARÉ

Book ID
109015202
Publisher
John Wiley and Sons
Year
2006
Tongue
English
Weight
165 KB
Volume
29
Category
Article
ISSN
8756-758X

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

The extended finite element method in th
The extended finite element method in thermoelastic fracture mechanics
✍ Marc Duflot 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 493 KB

## Abstract The extended finite element method (XFEM) is applied to the simulation of thermally stressed, cracked solids. Both thermal and mechanical fields are enriched in the XFEM way in order to represent discontinuous temperature, heat flux, displacement, and traction across the crack surface,

An extended finite element method for hy
An extended finite element method for hydraulic fracture problems
✍ Lecampion, Brice 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 404 KB 👁 1 views

## Abstract In this paper, the extended finite element method (X‐FEM) is investigated for the solution of hydraulic fracture problems. The presence of an internal pressure inside the crack is taken into account. Special tip functions encapsulating tip asymptotics typically encountered in hydraulic

Application of an elastoplastic boundary
Application of an elastoplastic boundary-element method to some fracture-mechanics problems
✍ T.A. Cruse; E.Z. Polch 📂 Article 📅 1986 🏛 Elsevier Science 🌐 English ⚖ 979 KB

The boundary-integral equation (BIE) method for 3D elastic fracture mechanics has been extended to the elastoplastic problem. The formulation makes use of a special elastic Green's function for the crack, thereby eliminating the need to model the crack itself. Application of the general formulation

An extended finite element method applie
An extended finite element method applied to levitated droplet problems
✍ Patrick Esser; Jörg Grande; Arnold Reusken 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 637 KB

## Abstract We consider a standard model for incompressible two‐phase flows in which a localized force at the interface describes the effect of surface tension. If a level set method is applied then the approximation of the interface is in general not aligned with the triangulation. This causes sev

The extended finite element method (XFEM
The extended finite element method (XFEM) for solidification problems
✍ Jack Chessa; Patrick Smolinski; Ted Belytschko 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 340 KB 👁 1 views

## Abstract An enriched finite element method for the multi‐dimensional Stefan problems is presented. In this method the standard finite element basis is enriched with a discontinuity in the derivative of the temperature normal to the interface. The approximation can then represent the phase interf