✦ LIBER ✦

The performance of PCD tools in high-speed milling of Ti6Al4V

✍ Scribed by Gert Adriaan Oosthuizen; Guven Akdogan; Nico Treurnicht

Publisher: Springer
Year: 2010
Tongue: English
Weight: 522 KB
Volume: 52
Category: Article
ISSN: 0268-3768
DOI: 10.1007/s00170-010-2804-2

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Tool wear and cutting forces variation i

Tool wear and cutting forces variation in high-speed end-milling Ti-6Al-4V alloy

✍ S. Zhang; J. F. Li; J. Sun; F. Jiang 📂 Article 📅 2009 🏛 Springer 🌐 English ⚖ 511 KB

An experimental investigation of effects

An experimental investigation of effects of cooling/lubrication conditions on tool wear in high-speed end milling of Ti-6Al-4V

✍ Y. Su; N. He; L. Li; X.L. Li 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 319 KB

High-speed machining of titanium alloys generates high cutting temperature in the cutting zone, which decreases tool life rapidly. So the improvement of the tool life in the high-speed machining of titanium alloys very much depends on the effectiveness of the cooling/lubrication provided. In this pa

Constitutive analysis of the high-temper

Constitutive analysis of the high-temperature deformation mechanisms of Ti–6Al–4V and Ti–6.85Al–1.6V alloys

✍ Jeoung Han Kim; S.L. Semiatin; Chong Soo Lee 📂 Article 📅 2005 🏛 Elsevier Science 🌐 English ⚖ 874 KB

The high-cycle fatigue behavior of Ti-6A

The high-cycle fatigue behavior of Ti-6Al-4V alloy

✍ R.K. Steele; A.J. McEvily 📂 Article 📅 1976 🏛 Elsevier Science 🌐 English ⚖ 708 KB

Ahatraet-The cyclic stress-strain behavior and the SIN behavior of a "pseudo-elastic" alloy, Ti-6AL-4V of coarsened micros~uct~ and of a "plastic" material, copper, are compared. In accord with views recently put forth by Freudenthal, important differences are noted between these two types of materi

Experiments and finite element simulatio

Experiments and finite element simulations on micro-milling of Ti–6Al–4V alloy with uncoated and cBN coated micro-tools

✍ T. Özel; T. Thepsonthi; D. Ulutan; B. Kaftanoğlu 📂 Article 📅 2011 🏛 International Academy for Production Engineering 🌐 English ⚖ 497 KB

In vivo performance of selective electro

In vivo performance of selective electron beam-melted Ti-6Al-4V structures

✍ Sabine Ponader; Cornelius von Wilmowsky; Martin Widenmayer; Rainer Lutz; Peter H 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 807 KB

## Abstract Highly porous titanium structures are widely used for maxillofacial and orthopedic surgery because of their excellent mechanical properties similar to those of human bone and their facilitation of bone ingrowth. In contrast to common methods, the generation of porous titaniumproducts by