✦ LIBER ✦

The performance of ceramic and cermet cutting tools for the machining of austempered ductile iron

✍ Scribed by Kubilay Aslantas; Irfan Ucun

Publisher: Springer
Year: 2008
Tongue: English
Weight: 463 KB
Volume: 41
Category: Article
ISSN: 0268-3768
DOI: 10.1007/s00170-008-1528-z

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

The effects of austempering temperature

The effects of austempering temperature and time onto the machinability of austempered ductile iron

✍ M. Cemal Cakir; Ali Bayram; Yahya Isik; Baris Salar 📂 Article 📅 2005 🏛 Elsevier Science 🌐 English ⚖ 667 KB

The influence of depth of cut on the mac

The influence of depth of cut on the machinability of an alloyed austempered ductile iron

✍ B. Avishan; S. Yazdani; D. Jalali Vahid 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 849 KB

Investigating the machinability of auste

Investigating the machinability of austempered ductile irons having different austempering temperatures and times

✍ M. Cemal Cakir; Yahya Isik 📂 Article 📅 2008 🏛 Elsevier Science ⚖ 235 KB

Documentation of tool wear progress in t

Documentation of tool wear progress in the machining of nodular ductile iron with silicon nitride-based ceramic tools

✍ W. Grzesik; J. Małecka 📂 Article 📅 2011 🏛 International Academy for Production Engineering 🌐 English ⚖ 367 KB

The role of thermal diffusivity in the m

The role of thermal diffusivity in the machining performance of oxide ceramic cutting tool materials

✍ J.E. Matta; W.L. Roper; D.P.H. Hasselman; G.E. Kane 📂 Article 📅 1976 🏛 Elsevier Science 🌐 English ⚖ 696 KB

The effect of alloying elements on surfa

The effect of alloying elements on surface roughness and cutting forces during machining of ductile iron

✍ Ulvi Şeker; İbrahim Çiftçi; Hasan Hasirci 📂 Article 📅 2003 🏛 Elsevier Science ⚖ 884 KB

Due to its enhanced strength, ductility and toughness, ductile iron has poor machining properties when compared to flake graphite cast iron. However, when a steel part is replaced with ductile iron, better machinability is considered to be the most important gain. This study presents the results of