The performance of absorbing materials with ferrite grains
โ Scribed by Yoshihiro Konishi; Hideki Komori
- Publisher
- John Wiley and Sons
- Year
- 1997
- Tongue
- English
- Weight
- 160 KB
- Volume
- 16
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
โฆ Synopsis
fects of bias voltage, input pulse amplitude, and pulse width on the output waveform of the network have been investigated. It was found that for a 3 V, 250 ns rectangular pulse, the measured output pulse amplitude and width at stage 60 were 4.3 V and 144 ns, respectively.
๐ SIMILAR VOLUMES
gain in the case of 40 m thick BCB is smaller than in the case of 20 m BCB. This can be due to coupling power to the surface-wave modes, which increases as the thickness of the thin BCB film increases. ## CONCLUSION Brick-wall antennas fed by a coplanar waveguide and built in the MCM-D technology
The current system for quantitative determination of absorbing gel materials (AGMs) in diapers utilizes air bubbling in the extraction procedure followed by acid-based titration. However, two issues have arisen: One is a corrosion problem on stainless steel frames due to acid vapor coming from the e