The onset velocity of a liquid–solid circulating fluidized bed
✍ Scribed by Ying Zheng; Jing-Xu (Jesse) Zhu
- Book ID
- 114079215
- Publisher
- Elsevier Science
- Year
- 2001
- Tongue
- English
- Weight
- 178 KB
- Volume
- 114
- Category
- Article
- ISSN
- 0032-5910
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
## Abstract Although axial liquid dispersion has been studied extensively in particulate fluidized beds, no data has been reported previously in a liquid–solid circulating fluidized bed (LSCFb). In this work, the axial liquid dispersions at various radial positions were measured in an LSCFB of 76 m
## Abstract An experiment was conducted to acquire a set of systematic data of particle holdup in risers of a liquid–solid circulating fluidized bed. In the experiment, two kinds of riser were provided, their inner diameter being 24 mm and 36 mm, respectively. Tested particles were of glass and cer
Liquid-solid circulating fluidized beds have a number of attractive features suitable for processes where liquid-solid contact is important (Liang et al., 1996;Zhang et al., 2002). Liang et al. (1996) and Zheng et al. (2002) studied the radial profile of the solid fraction in the liquid-solid circul
A special operation of gas-liquid-solid fluidization (the three-phase circulating fluidization) was investigated. The particle circulation flow rate in the circulating regime was measured. The gas holdup in this regime was obtained with a conductive probe. The relative solids holdup in the bubble