✦ LIBER ✦

The Natural Constituents of Historical Textile Dyes

✍ Scribed by Ester S. B. Ferreira; Alison N. Hulme; Hamish McNab; Anita Quye

Publisher: John Wiley and Sons
Year: 2004
Weight: 7 KB
Volume: 35
Category: Article
ISSN: 0931-7597
DOI: 10.1002/chin.200444268

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Extraction of natural dyes for textile d

Extraction of natural dyes for textile dyeing from coloured plant wastes released from the food and beverage industry

✍ Thomas Bechtold; Rita Mussak; Amalid Mahmud-Ali; Erika Ganglberger; Susanne Geis 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 393 KB

Extractionless non-hydrolysis surface-en

Extractionless non-hydrolysis surface-enhanced Raman spectroscopic detection of historical mordant dyes on textile fibers

✍ Z. Jurasekova; E. del Puerto; G. Bruno; J. V. García-Ramos; S. Sanchez-Cortes; C 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 274 KB

Modeling and sensitivity analysis of dye

Modeling and sensitivity analysis of dyes adsorption onto natural adsorbent from colored textile wastewater

✍ Niyaz Mohammad Mahmoodi; Mokhtar Arami 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 191 KB

Anthocyanin dyes extracted from grape po

Anthocyanin dyes extracted from grape pomace for the purpose of textile dyeing

✍ Thomas Bechtold; Amalid Mahmud-Ali; Rita Mussak 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 265 KB

Investigation of Red Natural Dyes Used i

Investigation of Red Natural Dyes Used in Historical Objects by HPLC-DAD-MS

✍ Ioannis Karapanagiotis; Yannis Chryssoulakis 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 166 KB

Treatment of wastewater containing dyes

Treatment of wastewater containing dyes used in the Syrian textile industry

✍ Saleh El-Kadri; Ousama Dabbit; Hassan Kakhia 📂 Article 📅 2002 🏛 Wiley (John Wiley & Sons) 🌐 English ⚖ 137 KB

## Abstract Three types of wastewater, from commercial dyeings containing reactive, disperse and direct dyes were treated using an organic coagulant at pH 5.5 as a first step, with stirring for 5 min. The second step was oxidation by Fenton's reagent (hydrogen peroxide and iron(II) sulfate) at pH 2