Three types of high-strength polyethylene (PE) fiber-reinforced composite sheets were made by compression molding at the vicinity of melting point of the fiber. Sheet I was molded from only PE fibers. Sheets II and III were prepared by the compression molding of PE fiber with conventional high-and l
The nanomechanical and nanoscratch properties of MWNT-reinforced ultrahigh-molecular-weight polyethylene coatings
β Scribed by S. R. Bakshi; K. Balani; T. Laha; J. Tercero; A. Agarwal
- Book ID
- 107523176
- Publisher
- The Minerals, Metals & Materials Society
- Year
- 2007
- Tongue
- English
- Weight
- 684 KB
- Volume
- 59
- Category
- Article
- ISSN
- 1047-4838
No coin nor oath required. For personal study only.
π SIMILAR VOLUMES
## Abstract Various blend ratios of highβdensity polyethylene (HDPE) and ultrahighβmolecularβweight polyethylene (UHMWPE) were prepared with the objective of determining their suitability as biomaterials. Although the presence of HDPE in the blends enabled melt processing, the presence of UHMWPE he
A dynamic thermomechanical analysis method was used to determine the values of the viscoelastic parameters, storage modulus (E) and the tangent of the loss angle (tan d) of samples taken from the near surface and core regions of ultrahigh molecular weight polyethylene (UHMWPE) bar stock specimens th
## Abstract The effects of radiation sterilization on ultrahigh molecular weight polyethylene were explored by freeze fractures, electron spin resonance, absorption of aqueous media, density measurements, smallβangle and wideβangle xβray scatter, differential scanning calorimetry, infrared and ultr