✦ LIBER ✦

The miscibility and morphology of epoxy resin/poly(ethylene oxide) blends

✍ Scribed by Guo Qipeng; Peng Xinsheng; Wang Zhiji

Book ID: 107846473
Publisher: Elsevier Science
Year: 1991
Tongue: English
Weight: 902 KB
Volume: 32
Category: Article
ISSN: 0032-3861
DOI: 10.1016/0032-3861(91)90561-v

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Miscibility, crystallization kinetics an

Miscibility, crystallization kinetics and real-time small-angle X-ray scattering investigation of the semicrystalline morphology in thermosetting polymer blends of epoxy resin and poly(ethylene oxide)

✍ Q Guo; C Harrats; G Groeninckx; M.H.J Koch 📂 Article 📅 2001 🏛 Elsevier Science 🌐 English ⚖ 764 KB

Miscibility of epoxy resins/poly(ethylen

Miscibility of epoxy resins/poly(ethylene oxide) blends cured with phthalic anhydride

✍ Xiaolie Luo; Sixun Zheng; Naibin Zhang; Dezhu Ma 📂 Article 📅 1994 🏛 Elsevier Science 🌐 English ⚖ 451 KB

Crystallization, morphology, structure a

Crystallization, morphology, structure and miscibility of poly(ethylene oxide) based blends

✍ Cimmino, S.; Martuscelli, E.; Silvestre, C. 📂 Article 📅 1988 🏛 John Wiley and Sons 🌐 English ⚖ 355 KB

Miscibility, morphology and fracture tou

Miscibility, morphology and fracture toughness of epoxy resin/poly(styrene-co-acrylonitrile) blends

✍ Sixun Zheng; Jian Wang; Qipeng Guo; Jun Wei; Jian Li 📂 Article 📅 1996 🏛 Elsevier Science 🌐 English ⚖ 822 KB

Poly(styrene-co-acrylonitrile) (SAN) with 25 wt% acrylonitrile (AN) content was found to be miscible with uncured bisphenol-A-type resin, i.e. diglycidylether of bisphenol A (DGEBA), as shown by the existence of a single glass transition temperature within the whole composition range. Miscibility be

Epoxy resin/poly(ethylene oxide) blends

Epoxy resin/poly(ethylene oxide) blends cured with aromatic amine

✍ Zheng Sixun; Zhang Naibin; Luo Xiaolie; Ma Dezhu 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 648 KB

Ternary Thermosetting Blends of Epoxy Re

Ternary Thermosetting Blends of Epoxy Resin, Poly(ethylene oxide) and Poly(ε-caprolactone)

✍ Minghua Yin; Sixun Zheng 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 341 KB

## Abstract **Summary:** The ternary thermosetting blends composed of epoxy resin, poly(ethylene oxide) (PEO) and poly(__ε__‐caprolactone) (PCL) were prepared via in situ polymerization of epoxy monomers in the presence of the two crystalline polymers, PEO and PCL. DSC results showed that the binar