The Metal–Organic Chemical Vapor Deposition of Lanthanum Nickelate Electrodes for Use in Ferroelectric Devices
✍ Scribed by P.A. Lane; M.J. Crosbie; P.J. Wright; P.P. Donohue; P.J. Hirst; C.L. Reeves; C.J. Anthony; J.C. Jones; M.A. Todd; D.J. Williams
- Publisher
- John Wiley and Sons
- Year
- 2003
- Tongue
- English
- Weight
- 419 KB
- Volume
- 9
- Category
- Article
- ISSN
- 0948-1907
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
Lanthanum nickelate layers have been deposited onto 100 mm diameter silicon/silicon dioxide and (0001) sapphire substrates by liquid‐delivery metal–organic (MO) CVD using the precursors La(thd)~3~ and Ni(thd)~2~ (thd = 2,2,6,6‐tetramethyl‐3,5‐heptanedionato) dissolved in tetrahydrofuran and heptane. The LaNiO~3~ (LNO) was deposited at 630 °C in an oxidizing atmosphere, and the as‐grown layers were highly crystalline and highly (110)‐oriented on Si/SiO~2~. Electrical resistivity studies were performed and showed a dependence on the La/Ni ratio, the substrate used, and the post‐deposition annealing conditions. A minimum electrical resistivity value of 300 μΩ cm was measured for LNO deposited on (0001) sapphire and rapidly annealed at 750 °C. The resistivity values of the LNO layers deposited onto silicon/silicon dioxide were higher, with a minimum value of 1 mΩ cm. The rapid annealing at 750 °C resulted in cracking of some of the LNO layers deposited onto the silicon substrates. However, the layers that were nickel‐rich withstood the annealing treatment better and showed little evidence of cracking.