✦ LIBER ✦

The mechanical design of thin beryllium windows for synchrotron radiation

✍ Scribed by Eric L. Brodsky

Publisher: Elsevier Science
Year: 1988
Tongue: English
Weight: 226 KB
Volume: 266
Category: Article
ISSN: 0168-9002
DOI: 10.1016/0168-9002(88)90411-1

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

On the requirements to the instrumentati

On the requirements to the instrumentation for the new generation of the synchrotron radiation sources. Beryllium windows

✍ A. Snigirev; I. Snigireva; V.G. Kohn; S.M. Kuznetsov 📂 Article 📅 1996 🏛 Elsevier Science 🌐 English ⚖ 555 KB

Design considerations for parasitic use

Design considerations for parasitic use of synchrotron radiation in the infrared

✍ James R. Stevenson; J.Michael Cathcart 📂 Article 📅 1980 🏛 Elsevier Science ⚖ 159 KB

Design and measurements of a thin quadru

Design and measurements of a thin quadrupole magnet for the AGS synchrotron

✍ N. Tsoupas; R. Alforque; A. Jain; W. MacKay; I. Marneris 📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 767 KB

Four quadrupoles were installed in four straight sections of the AGS synchrotron to compensate for the effect on the beam optics of two helical magnets also installed in the AGS. The overall length of each quadrupole is less than 30cm, so it fits in the 62cm long straight section of the AGS ring. At

Theoretical considerations on the design

Theoretical considerations on the design of three-beam X-ray monochromators for synchrotron radiation

✍ Chuan-Hwai Chen; Shih-Lin Chang 📂 Article 📅 1991 🏛 Elsevier Science 🌐 English ⚖ 521 KB