✦ LIBER ✦

The kinetics of duplex scale formation on 18/8 type stainless steel

✍ Scribed by A. F. Smith; M. O. Tucker; R. Hales

Publisher: Springer-Verlag
Year: 1982
Tongue: English
Weight: 697 KB
Volume: 17
Category: Article
ISSN: 0030-770X
DOI: 10.1007/bf00742115

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

The oxidation of an 18/8 type stainless

The oxidation of an 18/8 type stainless steel in CO2

✍ A. F. Smith 📂 Article 📅 1979 🏛 John Wiley and Sons 🌐 German ⚖ 567 KB

## Abstract The oxidation behaviour of an 18/8 type stainless steel has been studied in the temperature range 873‐1258 K (600–985 °C) by continous weight gain measurements, metallography and scanning electron microscopy. An initial high oxidation rate was followed by a much slower rate. Duplex scal

Kinetics of formation of the σ-phase in

Kinetics of formation of the σ-phase in austenite-ferrite stainless steel type X18AΓ12

✍ Petrova, Ruska A. 📂 Article 📅 1987 🏛 John Wiley and Sons 🌐 English ⚖ 325 KB

On the formation of grain structure duri

On the formation of grain structure during friction stir welding of duplex stainless steel

✍ T. Saeid; A. Abdollah-zadeh; T. Shibayanagi; K. Ikeuchi; H. Assadi 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 862 KB

The oxidation of 18/8 type stainless ste

The oxidation of 18/8 type stainless steel in high pressure CO2/2% CO

✍ A. F. Smith 📂 Article 📅 1981 🏛 John Wiley and Sons 🌐 German ⚖ 773 KB

## Abstract The oxidation of a variety of 18/8 stainless steels in high pressure CO~2~/2% CO has been followed in the temperature range 550–650°C using intermittent weight gain measurement metallography, fractography and scanning electron microscopy. Duplex scales formed at an early stage of oxidat

Effects of high magnetic fields on the f

Effects of high magnetic fields on the flow stress of 18-8 stainless steels

✍ B. Fultz; J.W. Morris Jr 📂 Article 📅 1986 🏛 Elsevier Science ⚖ 704 KB

The plastic deformation of two 18-8 stainless steels was studied in magnetic fields as large as 18 T at temperatures of 4, 77 and 290 K. Changes in stress-strain behavior during magnetic exposure at cryogenic temperatures are reported, and are associated with an enhanced f.c.c.+b.c.c. martensitic tr

Some studies on the service weldability

Some studies on the service weldability of HSLA steels using 18Cr, 8Ni, 6Mn type austenitic electrodes

✍ V.S.R. Murti; Y.R. Sastry; V.G.N. Rao; G.M. Reddy 📂 Article 📅 1993 🏛 Elsevier Science 🌐 English ⚖ 772 KB

High-strength low-alloy (HSLA) steels are used widely in the fabrication of heavy structures such as ships, pressure vessels and armoured vehicles, etc. However, they are difficult to weld due to their high hardenability and susceptibility to cold cracking. A survey of indigeneous welding consumable