𝔖 Bobbio Scriptorium
✦   LIBER   ✦

The influence of surface oxide composition and structure on carburization in carburization in carbon monoxide – carbon dioxide

✍ Scribed by S. Waher

Publisher
John Wiley and Sons
Year
1975
Tongue
German
Weight
629 KB
Volume
26
Category
Article
ISSN
0947-5117

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

The oxidation and carburization of two 20 Cr 30 Ni alloys with nominally 0 and 0.5 wt % Si have been investigated by cyclic exposure to carbon monoxide and carbon dioxide at 1000°C.

In carbon monoxide a chromium oxide film is formed which inhibits further carbon deposition. In carbon dioxide an iron chromium oxide of the spinel type is formed which during subsequent exposure to carbon monoxide acts as a catalyst for carbon deposition. In some areas a breakthrough of the initially formed chromium oxide layer occurs during carbon dioxide treatment. Extensive carbon penetration takes place in these breakthrough areas.

The spinel formation and the breakthrough is retarded in the silicon‐containing steel owing to the formation of a thin continuous silica layer at the metal‐chromium oxide interface. This has a beneficial effect on the carburization resistance.

The results also imply that it is possible to lower the catalytic effect of the tube material on carbon deposition or even on coke formation by controlling the surface oxide composition and structure.

📜 SIMILAR VOLUMES

Oligomer Deposition on the Surface of PE
Oligomer Deposition on the Surface of PET Fiber in Supercritical Carbon Dioxide Fluid
✍ Yutaka Kawahara; Masaki Kamo; Kiyoshi Yamamoto; Satoshi Ogawa; Douhiko Terada; T 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 184 KB

## Abstract **Summary:** Spin‐drawing yarn (SDY) and high‐speed spun (HSS) fibers were produced from recycled poly(ethylene terephthalate) pellets, and the oligomer deposition on the surface of fiber in supercritical carbon dioxide fluid was compared. The oligomer deposition was obvious for SDY, wh

Studies on the structure and formation m
Studies on the structure and formation mechanism of carbon gel in the carbon black filled polyisoprene rubber composite
✍ N. Kida; M. Ito; F. Yatsuyanagi; H. Kaido 📂 Article 📅 1996 🏛 John Wiley and Sons 🌐 English ⚖ 440 KB 👁 2 views

The structure and formation mechanism of carbon gel in carbon black filled polyisoprene composites were studied by the pulsed NMR technique. The composites were prepared from a wide range of molecular weights by a solution blend. The carbon gels were extracted from the composites by a solvent-extrac

The influence of carbon particles on the
The influence of carbon particles on the corrosion of iron in a humid, sulphur dioxide-containing atmosphere
✍ R. Ericsson; B. Heimler; N.-G. Vannerberg 📂 Article 📅 1973 🏛 John Wiley and Sons 🌐 German ⚖ 419 KB

## Abstract Iron samples covered with a thin layer of activated carbon have been exposed to humid atmospheres at various relative humidities and with a various sulfur dioxide contents. Contrary to expectation the corrosion is initially faster at 55 and 65% relative humidity that at higher humiditie