𝔖 Bobbio Scriptorium
✦   LIBER   ✦

The influence of surface finish of reinforcing steel and ph of the test solution on the chloride threshold concentration for corrosion initiation in synthetic pore solutions

✍ Scribed by L.T. Mammoliti; L.C. Brown; C.M. Hansson; B.B. Hope


Book ID
107728789
Publisher
Elsevier Science
Year
1996
Tongue
English
Weight
383 KB
Volume
26
Category
Article
ISSN
0008-8846

No coin nor oath required. For personal study only.


πŸ“œ SIMILAR VOLUMES


Influence of CaCl2 and NaCl from differe
✍ Jinxia Xu; Linhua Jiang; Weilun Wang; Yu Jiang πŸ“‚ Article πŸ“… 2011 πŸ› Elsevier Science 🌐 English βš– 640 KB

The influence of CaCl 2 and NaCl from internal and external sources on the chloride threshold value for the corrosion of steel reinforcement in concrete has been investigated. The onset of active corrosion for the steel reinforcement has been detected by half-cell potential and linear polarization m

Influence of pH and sulphate content of
✍ B. WallΓ©n; G. WranglΓ©n πŸ“‚ Article πŸ“… 1965 πŸ› Elsevier Science 🌐 English βš– 442 KB

Graphite anode corrosion exhlblts a maximum at neutral pH values as the result of two opposmg factors This 1s explamed of the anodlc oxygen the amount of oxygen evolved per unit time and the actlvlty The presence of sulphate ion m the solution mcreases graphite anode corrosion strongly m concentrate

Influence of cold work and sigma phase o
✍ A. Elhoud; H. Ezuber; W. Deans πŸ“‚ Article πŸ“… 2010 πŸ› John Wiley and Sons 🌐 German βš– 671 KB

## Abstract The effect of cold work (up to 16% strain) and sigma phase precipitation (at 850 °C for 10 and 60 min) on the pitting resistance of 25 chromium super duplex stainless steel were investigated in 3.5% sodium chloride solution at 70 and 90 °C. Anodic polarization scans for cold worked samp