✦ LIBER ✦

The influence of oxidation on the creep behavior of aluminum

✍ Scribed by Farghalli A. Mohamed

Publisher: Elsevier Science
Year: 1980
Weight: 330 KB
Volume: 43
Category: Article
ISSN: 0025-5416
DOI: 10.1016/0025-5416(80)90104-4

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

The effect of various anodic coatings on

The effect of various anodic coatings on the creep behavior of a strong aluminum alloy

✍ A. Arbel; M. Natan 📂 Article 📅 1980 🏛 Elsevier Science ⚖ 602 KB

The effect of stress and subgrain size o

The effect of stress and subgrain size on the creep behavior of high purity aluminum

✍ I. Ferreira; R.G. Stang 📂 Article 📅 1983 🏛 Elsevier Science ⚖ 741 KB

Influence of delayed injection time on t

Influence of delayed injection time on the creep behavior of acrylic bone cement

✍ Norman, T. L. ;Williams, M. ;Gruen, T. A. ;Blaha, J. D. 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 32 KB 👁 3 views

It has been proposed that creep of acrylic bone bone cement. ''Delayed'' injection time of acrylic bone cement cement may contribute to loosening of cemented total joint increased creep by approximately 5 times in 24 h compared replacements. If true, it is important that factors affecting to specime

Influence of carbon on the static and cy

Influence of carbon on the static and cyclic creep behaviors of alpha iron

✍ D.K. Shetty; M. Meshii 📂 Article 📅 1978 🏛 Elsevier Science ⚖ 709 KB

Influence of the Matrix Microstructure o

Influence of the Matrix Microstructure on the Creep Behavior of SiC-Fiber Reinforced Ti-Alloys

✍ J. Hemptenmacher; P. W. M. Peters; K. Weber 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 323 KB 👁 3 views

Factors influencing the creep behavior o

Factors influencing the creep behavior of poly(methyl methacrylate) cements

✍ Treharne, Richard W. ;Brown, Norman 📂 Article 📅 1975 🏛 John Wiley and Sons 🌐 English ⚖ 305 KB 👁 1 views

## Abstract Room temperature compression creep and recovery tests have been performed using samples of pure poly(methyl methacrylate) (PMMA), three commercially available poly(methyl methacrylate) cements, and several experimental cements. From these tests the influence of density, mixing procedure