✦ LIBER ✦

The influence of neutron irradiation on the magnetic relaxation spectrum of commercial non-oriented iron-silicon steel

✍ Scribed by Blythe, H. J. ;Walz, F. ;Klugmann, E.

Publisher: John Wiley and Sons
Year: 1985
Tongue: English
Weight: 537 KB
Volume: 90
Category: Article
ISSN: 0031-8965
DOI: 10.1002/pssa.2210900228

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

The Magnetic Relaxation Spectrum of Plas

The Magnetic Relaxation Spectrum of Plastically Deformed Non-Oriented Iron-Silicon Steel in the Temperature Range 200 to 800 K

✍ Blythe, H. J. ;Walz, F. 📂 Article 📅 1985 🏛 John Wiley and Sons 🌐 English ⚖ 773 KB

The influence of small amounts of nitrog

The influence of small amounts of nitrogen and carbon on the magnetic after-effect in neutron-irradiated iron I. Low-temperature relaxation

✍ Blythe, H. J. 📂 Article 📅 1973 🏛 John Wiley and Sons 🌐 English ⚖ 567 KB

The influence of small amounts of nitrog

The influence of small amounts of nitrogen and carbon on the magnetic after-effect in neutron-irradiated iron II. High-temperature relaxation

✍ Blythe, H. J. 📂 Article 📅 1973 🏛 John Wiley and Sons 🌐 English ⚖ 524 KB

Influence of the cut angle and grain siz

Influence of the cut angle and grain size on the behavior of non-oriented magnetic steels

✍ Mario Carpentieri; Giovanni Finocchio; Bruno Azzerboni; Ermanno Cardelli 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 163 KB

1051. The influence of small amounts of

1051. The influence of small amounts of nitrogen and carbon on the magnetic after-effect in neutron-irradiated iron. I. Low temperature relaxation: H J Blythe, Phys Stat Sol (a), 20 (1), 1973, 77–86

📂 Article 📅 1974 🏛 Elsevier Science 🌐 English ⚖ 152 KB

Study of vacuum levels in the annealing

Study of vacuum levels in the annealing of high silicon (6.4 wt%) non-oriented magnetic steel sheets obtained by rapid quenching and its incidence on grain size, texture and core losses

✍ I. Ibarrondo; J. Degauque 📂 Article 📅 1999 🏛 Elsevier Science 🌐 English ⚖ 90 KB

In the present study, high silicon (6.4 wt%) -iron microcrystalline ribbons (25 mm;38 m) were obtained directly from its melted state by rapid quenching. The material thus obtained was then submitted to heat treatment. This soft magnetic material is mainly used as cores in high-performance electric