✦ LIBER ✦

The influence of metal and different expansion coefficient of ceramic on the thermal stability of porcelain-fused-to-metal (PFM) crowns

Book ID: 122876361
Publisher: Elsevier Science
Year: 1993
Tongue: English
Weight: 124 KB
Volume: 21
Category: Article
ISSN: 0300-5712
DOI: 10.1016/0300-5712(93)90040-W

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

The influence of metal and different exp

The influence of metal and different expansion coefficient of ceramic on the thermal stability of porcelain-fused-to-metal (PFM) crowns: Lei Ya-chao et al. (1991) Chin J Stematol26: 329

📂 Article 📅 1994 🏛 Elsevier Science 🌐 English ⚖ 96 KB

The influence of veneering porcelain thi

The influence of veneering porcelain thickness of all-ceramic and metal ceramic crowns on failure resistance after cyclic loading

✍ Akihiko Shirakura; Heeje Lee; Alessandro Geminiani; Carlo Ercoli; Changyong Feng 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 667 KB

Comparison of the load at failure of sol

Comparison of the load at failure of soldered and nonsoldered porcelain- fused-to-metal crowns

✍ Min-Sok Kang; Carlo Ercoli; Daniel F Galindo; Gerald N Graser; Mark E Moss; Ross 📂 Article 📅 2003 🏛 Elsevier Science 🌐 English ⚖ 259 KB

Spectrophotometric evaluation of the opt

Spectrophotometric evaluation of the optical influence of different metal alloys and porcelains in the metal-ceramic complex

✍ Stefanos G. Kourtis; Aris-Petros Tripodakis; Asterios A. Doukoudakis 📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 219 KB

Thermal creep analysis of noble metal al

Thermal creep analysis of noble metal alloys for the ceramic-fused-to-metal technique

✍ Fischer, J. ;Baltzer, N. ;Fleetwood, P. W. 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 229 KB 👁 1 views

Distortion of metal frameworks for the ceramic fused to metal technique during firing is attributed to thermal creep of the alloys. Usually thermal creep measurements are performed at constant load and constant temperature over varying time periods. Because metal frameworks for the ceramic-fused-to-

Evaluating the bond strength of opaque m

Evaluating the bond strength of opaque material on porcelain fused to metal restorations (PFM) alloys by scratch test method

✍ O. Culha; M. Zor; M. Ali Gungor; Y. Arman; M. Toparli 📂 Article 📅 2009 🏛 Elsevier Science ⚖ 295 KB