𝔖 Bobbio Scriptorium
✦   LIBER   ✦

The influence of lubrication rate on wear behavior

✍ Scribed by R.G. Bayer

Publisher
Elsevier Science
Year
1975
Tongue
English
Weight
467 KB
Volume
35
Category
Article
ISSN
0043-1648

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

The influence of wear paths produced by
The influence of wear paths produced by hip replacement patients during normal walking on wear rates
✍ Damien Bennett; Lee Humphreys; Seamus O'Brien; Connor Kelly; John Orr; David E. πŸ“‚ Article πŸ“… 2008 πŸ› Elsevier Science 🌐 English βš– 145 KB

## Abstract Variation in wear paths is known to greatly affect wear rates in vitro, with multidirectional paths producing much greater wear than unidirectional paths. This study investigated the relationship between multidirectional motion at the hip joint, as measured by aspect ratio, sliding dist

Influence of polyethylene creep behavior
Influence of polyethylene creep behavior on wear in total hip arthroplasty
✍ Janaki R. Penmetsa; Peter J. Laz; Anthony J. Petrella; Paul J. Rullkoetter πŸ“‚ Article πŸ“… 2006 πŸ› Elsevier Science 🌐 English βš– 267 KB

## Abstract After total hip arthroplasty (THA), polyethylene acetabular liner creep occurs quickly and serves to increases head–liner contact area and decrease contact pressures. What effect these early changes in contact mechanics will have on the wear behavior of the articulation remains unclear,

Friction and wear behaviors of several p
Friction and wear behaviors of several polymers under oil-lubricated conditions
✍ Zhao-Zhu Zhang; Qun-Ji Xue; Wei-Min Liu; Wei-Chang Shen πŸ“‚ Article πŸ“… 1998 πŸ› John Wiley and Sons 🌐 English βš– 417 KB πŸ‘ 2 views

The friction and wear properties of polytetrafluoroethylene (PTFE), polyimide (PI), and polyamide 66 (PA66) sliding against GCr15 bearing steel under both dry and oil-lubricated conditions were studied by using an MHK-500 ring-block wear tester (Timken wear tester), and then Stribeck's curves of PTF