๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

The influence of inhomogeneous rolling on the capacity of aluminium anode foil material

โœ Scribed by H.P. Kneynsberg; C.A. Verbraak; M.J. ten Bouwhuijs

Publisher
Elsevier Science
Year
1985
Weight
520 KB
Volume
72
Category
Article
ISSN
0025-5416

No coin nor oath required. For personal study only.

๐Ÿ“œ SIMILAR VOLUMES

Influence of anode material composition
Influence of anode material composition on the stability of electrochemically-prepared ferrate(VI) solutions
โœ Karel Bouzek; Martin J Schmidt; Anthony A Wragg ๐Ÿ“‚ Article ๐Ÿ“… 1999 ๐Ÿ› Wiley (John Wiley & Sons) ๐ŸŒ English โš– 121 KB ๐Ÿ‘ 2 views

The stability of electrochemically-prepared ferrate(VI) solution in 14 M NaOH solution was studied. White cast iron and pure iron were used as anode materials and the anodic current density during the ferrate(VI) preparation was varied in the range 4.4 to 42.8 mA cm ร€2 . The solution temperature ran

Influence of the Dispersoid Material and
Influence of the Dispersoid Material and Forming Process on the Creep Behaviour of Dispersion Strengthened Aluminium
โœ Univ.-Prof. Dr.-Ing. E. El-Magd; Assistant Prof. Y. Ismail; Dr. G.-J. Brockmann; ๐Ÿ“‚ Article ๐Ÿ“… 1997 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 628 KB

## Abstract The effect of small percentages of Al4C3 and Al2O3 in dispersion hardened aluminium on the creep behaviour has been investigated. A comparative study was conducted on the group of AlC3Ol and AlC2O2. These two groups were produced by cold isostatic pressing (CIP), but the second group wa

The Influence of Local Slip in Hertzian
The Influence of Local Slip in Hertzian Contacts on the Subsurface Elastic Material Stresses of Rolling Element Components
โœ Dr. A. P. Noronha ๐Ÿ“‚ Article ๐Ÿ“… 1993 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 692 KB

## Abstract Rolling element bearing components are subjected to high loads. These loads are transmitted from one bearing component to the next through Hertzian contacts. Since the bearing components are in motion as they transmit load, the elliptical contact region is subjected to normal as well as