๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

THE INFLUENCE OF INCLINATION ANGLE AND LATERAL DISPLACEMENT ON STRESSES IN CERAMIC-CERAMIC THR

โœ Scribed by Elhadi Sariali; Zhongmin Jin; Todd Stewart; John Fisher

Publisher
Elsevier Science
Year
2008
Tongue
English
Weight
192 KB
Volume
41
Category
Article
ISSN
0021-9290

No coin nor oath required. For personal study only.

๐Ÿ“œ SIMILAR VOLUMES

Effect of cup inclination angle during m
Effect of cup inclination angle during microseparation and rim loading on the wear of BIOLOXยฎ delta ceramic-on-ceramic total hip replacement
โœ Mazen Al-Hajjar; Ian J. Leslie; Joanne Tipper; Sophie Williams; John Fisher; Lou ๐Ÿ“‚ Article ๐Ÿ“… 2010 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 478 KB

## Abstract Ceramicโ€onโ€ceramic (CoC) bearings in total hip replacements (THRs) have shown low wear volumes under standard gait in hip simulator studies. However, clinical reports have indicated variations in wear rates and formation of stripeโ€like wear area on the ceramic femoral heads. The aim of

Influence of residual stresses and inter
Influence of residual stresses and interfacial shear strength on matrix properties in fibre-reinforced ceramic matrix composites
โœ S. Kumaria; R. N. Singh ๐Ÿ“‚ Article ๐Ÿ“… 1995 ๐Ÿ› Springer ๐ŸŒ English โš– 785 KB

Zircon matrix composites, uniaxially reinforced with a variety of SiC fibres were fabricated in order to create composites with different interracial properties. Interfacial properties were varied by changing the nature of fibre coatings. The effect of changes in interracial shear strength on import