𝔖 Bobbio Scriptorium
✦   LIBER   ✦

The influence of high amplitude cyclic straining on the behaviour of superelastic NiTi

✍ Scribed by Maria Guiomar de Azevedo Bahia; Rogério Fonseca Dias; Vicente Tadeu Lopes Buono

Publisher
Elsevier Science
Year
2006
Tongue
English
Weight
276 KB
Volume
28
Category
Article
ISSN
0142-1123

No coin nor oath required. For personal study only.

✦ Synopsis

The influence of high amplitude cyclic straining on the behaviour of a superelastic NiTi wire and of NiTi endodontic instruments was assessed. Cyclic bending tests to 1/2 and 3/4 of the wires fatigue life, for tensile strain amplitudes of 2.0, 3.0 e 4.5%, were performed. The NiTi endodontic instruments were tested in fatigue to 1/2 and 3/4 of their fatigue life, at maximum strain amplitudes between 3.3 and 5.0%. The wires transformation temperatures, determined by DSC, increased for higher strains. The values of torque to failure of the NiTi instruments, measured in torsion tests, were also influenced by cyclic straining.

📜 SIMILAR VOLUMES

Effect of cyclic straining of the harmon
Effect of cyclic straining of the harmonic amplitude spectrum of magnetoelastically generated voltage uB
✍ Pekka Ruuskanen; Pentti Kettunen 📂 Article 📅 1991 🏛 Elsevier Science 🌐 English ⚖ 743 KB

The amplitude spectrum of the magnetoelastically induced voltage u~ was studied during cyclic stressing of polycrystalline iron and nickel. Test specimens were loaded with a sinusoidaily varying stress with a frequency of 25 Hz. The amplitude spectrum of voltage u~ is a typical harmonic spectrum con

Superelasticity of free-standing NiTi fi
Superelasticity of free-standing NiTi films depending on the oxygen impurity of the used targets
✍ C. Zamponi; H. Rumpf; B. Wehner; J. Frenzel; E. Quandt 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 246 KB

## Abstract Off‐stoichiometric NiTi sputter targets were manufactured by ingot metallurgy in order to produce Ni‐rich NiTi thin films. Crystalline samples, which undergo a martensitic transformation, were fabricated by magnetron sputtering and subsequent thermal treatment. The sacrificial layer tec

Influence of strain on the thermal behav
Influence of strain on the thermal behaviour of poly(chlorotrifluoroethylene)
✍ Ramachandra, P; Ramani, R; Ramgopal, G; Shariff, Gani; Thimmegowda, M C; Sathyan 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 148 KB 👁 2 views

The eþ ects of uniaxial drawing on the free volume of poly(chlorotriýuoroethylene) have been investigated using the positron annihilation lifetime technique. Annealing measurements were made both in unstrained and maximum strained conditions of the polymer to understand the inýuence of residual stre