✦ LIBER ✦

The influence of fluid properties and inlet geometry on flooding in vertical and inclined tubes

✍ Scribed by A. Zapke; D.G. Kröger

Book ID: 107946703
Publisher: Elsevier Science
Year: 1996
Tongue: English
Weight: 867 KB
Volume: 22
Category: Article
ISSN: 0301-9322
DOI: 10.1016/0301-9322(95)00076-3

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Visualisation research on characteristic

Visualisation research on characteristics of the cryogenic slug flow in vertical and inclined tubes

✍ Yi-Peng Liu; Ping-Yang Wang; Xue-Yu Hu; Hua Zhang; Zhao-Hui Du 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 420 KB

Effect of inlet geometries and heating o

Effect of inlet geometries and heating on the entrance and fully-developed friction factors in the laminar and transition regions of a horizontal tube

✍ Tam, Hou Kuan; Tam, Lap Mou; Ghajar, Afshin J. 📂 Article 📅 2013 🏛 Elsevier Science 🌐 English ⚖ 977 KB

The influence of matrix rheological prop

The influence of matrix rheological properties on acoustic emission and damage accumulation in GRP tubes

✍ I. Ghorbel; D. Valentin; M.C. Yrieix; J. Grattier 📂 Article 📅 1991 🏛 Elsevier Science 🌐 English ⚖ 762 KB

The influence of fluid elasticity on wal

The influence of fluid elasticity on wall effects for creeping sphere motion in cylindrical tubes

✍ R. P. Chhabra; P. H. T. Uhlherr 📂 Article 📅 1988 🏛 John Wiley and Sons 🌐 English ⚖ 396 KB

Influences of the boundary conditions an

Influences of the boundary conditions and linearization on the stability of a radiating fluid in a vertical layer

✍ G. Lauriat; G. Desrayaud 📂 Article 📅 1985 🏛 Elsevier Science 🌐 English ⚖ 508 KB

The influence of stirrer geometry on bon

The influence of stirrer geometry on bonding and mechanical properties in friction stir welding process

✍ Mustafa Boz; Adem Kurt 📂 Article 📅 2004 🏛 Elsevier Science ⚖ 497 KB

In this study, Al 1080 alloy materials were welded using friction stir welding process. The influence of stirrer design on the welding process was investigated. For this purpose, five different stirrers, one of them square cross-sectioned and the rest were cylindrical with 0.85, 1.10, 1.40 and 2.1 m