𝔖 Bobbio Scriptorium
✦   LIBER   ✦

The influence of excimer laser treatment on an aluminium alloy surface

✍ Scribed by Hel. Badekas; A. Koutsomichalis; Chr. Panagopoulos

Publisher
Elsevier Science
Year
1988
Tongue
English
Weight
349 KB
Volume
34
Category
Article
ISSN
0257-8972

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Investigation of the influence of laser
Investigation of the influence of laser treatment parameters on the properties of the surface layer of aluminum alloys
✍ Jacek Borowski; Konrad Bartkowiak πŸ“‚ Article πŸ“… 2010 πŸ› Elsevier 🌐 English βš– 438 KB

An analysis of the literature concerning the methods of surface treatment of aluminum alloys has been performed. Based on the literature and on earlier initial investigation (hardness measurements, microscopic inspection, roughness measurements, tribological tests and scanning microscope inspection

Surface treatment of carbon/epoxy and gl
Surface treatment of carbon/epoxy and glass/epoxy composites with an excimer laser beam
✍ Q. BΓ©nard; M. Fois; M. Grisel; P. Laurens πŸ“‚ Article πŸ“… 2006 πŸ› Elsevier Science 🌐 English βš– 406 KB

The use of an excimer laser treatment, as a way to control the adhesion performances of glass/epoxy and carbon/epoxy composites has been investigated. Such a specific surface treatment can provide a selective removal of the organic matrix without any degradation of fibre reinforcements. Then, the i

Laser surface treatment of electroless N
Laser surface treatment of electroless Ni–P coatings on Al356 alloy
✍ R.Sh. Razavi; M. Salehi; M. Monirvaghefi; G.R. Gordani πŸ“‚ Article πŸ“… 2008 πŸ› Elsevier Science 🌐 English βš– 949 KB

In the present study, laser surface treatment of electroless Ni-P coating on Al356 alloy was performed using Nd:YAG pulsed laser at different scanning rates. The microstructure, phase, composition, microhardness and corrosion behaviour of the modified surface structure were analyzed using scanning e