𝔖 Bobbio Scriptorium
✦   LIBER   ✦

The influence of carbonyl sulphide on the inhibition of filamentary carbon deposition on stainless steel

✍ Scribed by G. R. Millward; H. E. Evans; I. P. Jones; C. D. Eley; C. W. Mowforth

Publisher
John Wiley and Sons
Year
2003
Tongue
German
Weight
452 KB
Volume
54
Category
Article
ISSN
0947-5117

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

This paper examines the role that COS plays in the inhibition of carbon deposition onto a Si‐free 20Cr‐25Ni‐Nb‐stabilized austenitic stainless steel. We have shown that the addition of just 240 vppb of COS to a standard gas deposit mixture of high carbon activity (1000 vppm C~2~H~4~, 1% CO, balance CO~2~) yields a dramatic fall in the amount of filamentous carbon deposited. The inhibitive effect persists when treatment is continued after COS has been subsequently removed from the treatment gas. Clearly, in these experiments the phenomenon is a result of substrate surface modification by the COS rather than changes in gas phase kinetics. Deposition onto surfaces where filamentous carbon has already been laid down is similarly inhibited.

📜 SIMILAR VOLUMES

Advanced studies on the influence of man
Advanced studies on the influence of manganese on the potential increase of stainless steels
✍ R. Kreikenbohm; M. Eisenbeis; P. Gümpel; P. Linhardt 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 German ⚖ 191 KB 👁 1 views

## Abstract The influence of manganese on the time course and on the final value of the open‐circuit potential of microbially influenced stainless steel (SS) has been examined by variation of the concentration of manganese in the aqueous phase and on the surface of the metal sample. Under the influ

Influences of passivating elements on th
Influences of passivating elements on the corrosion and biocompatibility of super stainless steels
✍ Young-Ran Yoo; Soon-Geun Jang; Keun-Taek Oh; Jung-Gu Kim; Young-Sik Kim 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 410 KB 👁 1 views

## Abstract Biometals need high corrosion resistance since metallic implants in the body should be biocompatible and metal ion release should be minimized. In this work, we designed three kinds of super stainless steel and adjusted the alloying elements to obtain different microstructures. Super st

The influence of grain size on the fatig
The influence of grain size on the fatigue behavior of annealed 316 LVM stainless steel
✍ Clemens, D. ;Galante, J. ;Rostoker, W. 📂 Article 📅 1979 🏛 John Wiley and Sons 🌐 English ⚖ 225 KB 👁 1 views

## Abstract Experimental tests demonstrate that there is a sharp drop in resistance to fatigue fracture when the grain size is increased from 75 to 150 μm. This is at least a partial explanation for fatigue fractures of the stems of total hip‐joint prostheses reported in the literature. It is also

Influence of heat flux and surface tempe
Influence of heat flux and surface temperature on the intergranular corrosion of stainless steel
✍ T. Prošek; P. Novák; J. Bystrianský 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 German ⚖ 258 KB 👁 1 views

## Abstract The exposure tests followed by metallographic evaluation and the electrochemical reactivation measurements in double‐loop (DL‐EPR) modification were used for investigation of the influence of non‐boiling heat transfer on initiation and rate of propagation of intergranular corrosion (IGC