𝔖 Bobbio Scriptorium
✦   LIBER   ✦

The influence of atmospheric composition on the abrasive wear of titanium and Ti-6Al-4V

✍ Scribed by A.P. Mercer; I.M. Hutchings

Publisher
Elsevier Science
Year
1988
Tongue
English
Weight
852 KB
Volume
124
Category
Article
ISSN
0043-1648

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Influence of sintering on the corrosion
Influence of sintering on the corrosion behavior of a Ti-6Al-4V alloy
✍ A. Bautista; C. Moral; G. Blanco; F. Velasco πŸ“‚ Article πŸ“… 2005 πŸ› John Wiley and Sons 🌐 German βš– 358 KB πŸ‘ 1 views

This work studies the influence of the sintering conditions of a Ti-6Al-4V alloy on its corrosion performance. The alloy was vacuum sintered in different conditions of time and temperature. The density and microstructure (designating phase distribution) are evaluated. Corrosion resistance through el

The wear behavior of ion-implanted Ti-6A
The wear behavior of ion-implanted Ti-6Al-4V against UHMW polyethylene
✍ McKellop, H. A. ;RΓΆstlund, T. V. πŸ“‚ Article πŸ“… 1990 πŸ› John Wiley and Sons 🌐 English βš– 783 KB

## Abstract Nitrogen‐ion‐implanted Ti‐6Al‐4V against UHMW polythylene was tested on a joint simulator to evaluate the wear behavior under different conditions. It was concluded that the polymer wear rate was not affected by ion implantation. The metallic wear, on the other hand, was substantially r

Wear-accelerated corrosion of Ti-6Al-4V
Wear-accelerated corrosion of Ti-6Al-4V and nitrogen-ion-implanted Ti-6Al-4V: Mechanisms and influence of fixed-stress magnitude
✍ Buchanan, R. A. ;Rigney, E. D. ;Williams, J. M. πŸ“‚ Article πŸ“… 1987 πŸ› John Wiley and Sons 🌐 English βš– 725 KB

Wear-accelerated corrosion rates at constant anodic potentials were evaluated for unimplanted and nitrogen-ion-implanted surgical Ti-6A1-4V while wearing against ultrahigh-molecular-weight polyethylene at stress levels up to 6.90 MPa (1000 psi). The ion implantation processing was found to reduce th