✦ LIBER ✦

The implantation behaviour of indium and silver in iron at low temperature

✍ Scribed by C. Nuytten; D. Vandeplassche; E. van Walle; L. Vanneste

Publisher: Elsevier Science
Year: 1982
Tongue: English
Weight: 501 KB
Volume: 92
Category: Article
ISSN: 0375-9601
DOI: 10.1016/0375-9601(82)90352-8

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

The magnetic behaviour of iron ammonium

The magnetic behaviour of iron ammonium alum at very low temperatures

✍ M.J Steenland; D De Klerk; M.L Potters; C.J Gorter 📂 Article 📅 1951 🏛 Elsevier Science ⚖ 467 KB

The frictional behaviour of iron and iro

The frictional behaviour of iron and iron-chromium alloys at elevated temperatures

✍ D.J. Barnes; F.H. Stott; G.C. Wood 📂 Article 📅 1977 🏛 Elsevier Science 🌐 English ⚖ 664 KB

The electrical resistance of gold and si

The electrical resistance of gold and silver at low temperatures

✍ W.J. De Haas; G.J. Van Den Berg 📂 Article 📅 1936 🏛 Elsevier Science ⚖ 313 KB

Analysis of the thermal noise behaviour

Analysis of the thermal noise behaviour in JG FET at low temperature

✍ D. Rigaud; J-P. Nougier; A. Touboul; G. Lecoy 📂 Article 📅 1971 🏛 Elsevier Science ⚖ 350 KB

The interferometric measurement of the t

The interferometric measurement of the thermal expansion of silver and palladium at low temperatures

✍ N. Waterhouse; B. Yates 📂 Article 📅 1968 🏛 Elsevier Science 🌐 English ⚖ 483 KB

The linear thermal expansion coefficients of silver and palladium have been measured in the temperature range 20°K to 273~K by an interferometric method. Photomultiplier detection was used and gas pressure changes were employed to effect changes in optical path, permitting the detection of length ch

Phenomenological study of the plastic be

Phenomenological study of the plastic behaviour of aluminium at low and medium temperatures

✍ G. Ferron; M. Mliha-Touati 📂 Article 📅 1987 🏛 Elsevier Science ⚖ 823 KB

Ah&act-The plastic behaviour of 1050 aluminium is studied by means of conventional tension tests, temperature change tests and load relaxation tests in the temperature range 77-540 K, A major difference is observed between the high-tem~rature region (above -300 K), where a long plastic transient is