𝔖 Bobbio Scriptorium
✦   LIBER   ✦

The hot plate welding of high-density polyethylene

✍ Scribed by Arthur W. Birley; Richard Buxton; Richard M. Shelley

Publisher
Elsevier Science
Year
1988
Tongue
English
Weight
507 KB
Volume
8
Category
Article
ISSN
0142-9418

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Friction welding of similar materials: P
Friction welding of similar materials: Polypropylene, high-density polyethylene, and nylon-6
✍ Ching-Bin Lin; Li Cheng Wu; Yu Yao Chen πŸ“‚ Article πŸ“… 2004 πŸ› John Wiley and Sons 🌐 English βš– 512 KB

## Abstract The effects of spin‐friction pressure and timing on the friction welding between parts of the same materials, PP, HDPE, and nylon‐6, are discussed. The heat‐affected zone is divided into three regions: the plasticized region (Zpl), the partly plasticized region (Zpd), and the undeformed

Crystallization of high-density polyethy
Crystallization of high-density polyethylene–linear low-density polyethylene blend
✍ S. K. Rana πŸ“‚ Article πŸ“… 1998 πŸ› John Wiley and Sons 🌐 English βš– 398 KB πŸ‘ 2 views

The crystallization studies revealed that the high-density polyethylene (HDPE) and linear low-density polyethylene (LLDPE) formed strong cocrystalline mass when they were melt blended in a single screw extruder. The progress of crystallization was observed through a small-angle light scattering inst

Necking of high-density polyethylene
Necking of high-density polyethylene
✍ Yasaku Wada; Akira Nakayama πŸ“‚ Article πŸ“… 1971 πŸ› John Wiley and Sons 🌐 English βš– 687 KB

Necking draw of high-density polyethylene is studied a t draw rates of 2.5 x 10-2 to 25 mm/min and at temperatures of -40' to 8OOC. Effect of temperature and draw rate on necking stress is interpreted in terms of viscoelastic flow of amorphous phase accompanying orientation of crystallites. It is pr