The granulometrical characteristics of a slowly-moving dust cloud
โ Scribed by Dirk Goossens
- Publisher
- John Wiley and Sons
- Year
- 1985
- Tongue
- English
- Weight
- 657 KB
- Volume
- 10
- Category
- Article
- ISSN
- 0360-1269
No coin nor oath required. For personal study only.
โฆ Synopsis
A torn-up road offered the opportunity to sample a dust cloud continuously at different heights during a time interval of 5 1 hours. In particular the granulometricalcharacteristics of thedust caught were investigated. It appears that if theair layer in the vicinity of a dust cloud is not too turbulent, the cloud will be clearly granulometrically stratified. The coarse material moves chiefly at the bottom of the cloud, whereas the fine material will occur both at the bottom and at the top. The experiment also shows that the higher the dust in the cloud, the worse it is sorted. Above a critical height, however, the degree of sorting increases again.
The variation of the mean dust diameter dSo, as a function of the height z, can be expressed in a simple semi-logarithmic equation. The variation of the dust quantity G, as a function of the height z, can also be expressed in a semi-logarithmic form but the correlation is higher when a power equation is used. The ratio of fine silt to coarse silt seems to vary parabolically with height.
One can only speak of an optimal transport height in the case of particles > 16 pm. For finer particles, the turbulence of a normal air stream is usually high enough to carry the particles anywhere in the dust cloud, so that one can no longer speak of an optimal transport height. The granulometrical border between aeolian transport in saltation and aeolian transport in suspension lies, according to the results of the experiment, at a diameter of about 63 pm.
๐ SIMILAR VOLUMES
A theoretical study is carried out to investigate the difference in the properties of an electromagnetic wave reflected from a fixed object and a moving object. Solutions of a wave equation in rectangular coordinates are used with different boundary conditions for the determination of the reflected