✦ LIBER ✦

The formation of coating shrinkage porosity in the process of thermal spraying

✍ Scribed by V.V. Sobolev; J.M. Guilemany

Publisher: Elsevier Science
Year: 1996
Tongue: English
Weight: 600 KB
Volume: 58
Category: Article
ISSN: 0924-0136
DOI: 10.1016/0924-0136(95)02100-0

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Assessment of the Microplasma Spraying P

Assessment of the Microplasma Spraying Process for Coating Application

✍ E. Lugscheider; K. Bobzin; L. Zhao; J. Zwick 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 504 KB

Influence of Input Parameters on Splat F

Influence of Input Parameters on Splat Formation and Coating Thermal Diffusivity in Plasma Spraying

✍ Z. Prochazka; K. A. Khor; J. Cizek 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 327 KB 👁 2 views

Plasma spraying is a cost effective method for protecting materials and components against severe operational environments. As the demand for more specific properties of coatings increases, it is necessary to study the relationships between plasma spray parameters and the final coating properties. I

Study of processing variables in laser g

Study of processing variables in laser glazing plasma-sprayed thermal barrier coatings

✍ P.C. Tsai; H.L. Tsai; David C. Tu 📂 Article 📅 1993 🏛 Elsevier Science 🌐 English ⚖ 818 KB

Buchbesprechung: The Science and Enginee

Buchbesprechung: The Science and Engineering of Thermal Spray Coatings

📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 50 KB

The influence of physical properties and

The influence of physical properties and spraying parameters on the creation of residual thermal stresses during the spraying process

✍ R. Elsing; O. Knotek; U. Balting 📂 Article 📅 1990 🏛 Elsevier Science 🌐 English ⚖ 634 KB

Sequential thermal modelling of the spra

Sequential thermal modelling of the spray-forming process

✍ Dirk Bergmann; Udo Fritsching 📂 Article 📅 2004 🏛 Elsevier Science 🌐 French ⚖ 884 KB

Three modules describing metal behaviour during sequential stages of the spray-forming process are coupled in this contribution to provide an integrated thermal simulation of the process. These sub-models describe the melt delivery to the atomizer (tundish), the spray, and the consolidation. Process