The use of solid contact flow-through calcium-selective electrodes as potentiometric detectors in flow-injection analysis and non-suppressed ion chromatography is discussed. Owing to the high selectivity of the membrane electrode based on tetratolyl-m-xylylenediphosphine dioxide, it can be used to m
The fluoride ion-selective electrode in flow injection analysis: Part 1. General Methodology
✍ Scribed by Wolfgang Frenzel; Peter Brätter
- Publisher
- Elsevier Science
- Year
- 1986
- Tongue
- English
- Weight
- 631 KB
- Volume
- 185
- Category
- Article
- ISSN
- 0003-2670
No coin nor oath required. For personal study only.
✦ Synopsis
A simple flow-injection system for determination of traces of fluoride by means of the fluoride-selective electrode is presented. A comparison of several flow-cell arrangements confirmed the advantages of a wall-jet design. Systematic investigations of the parameters affecting response times (i.e., polishing procedure, flow rate, carrier composition) established the optimal experimental conditions for measurements down to 1 pg 1-l fluoride. Calibration plots in the lower rg l-' range were neither Nernstian nor linear, but good precision (0.5-5%)
was obtained even when the potential differences for concentration steps of one decade were as small as 3 mV.
📜 SIMILAR VOLUMES
A flow analyser with enhanced samplmg frequency combmmg the features of flow-nuectlon and contmuous-flow analysis IS described Parameters of the analyser were optnmzed to ensure the highest rate of analysis allowed by the bubble-through flow cell wth fluoride-selectnre electrodes Fluonde was determm
An ammonium detection system using ion-selective electrodes (ISEs) in flow-injection analysis (FIA) is described. Because of the low selectivity of the nonactin ammonium selective electrode toward some common ions, notably potassium, different selectivity enhancement techniques have been examined. A
A simple, inexpensive home-made timer for coupling cam-controlled samplers to injectors for flow injection analysis is presented. Experimental conditions and a flow diagram are described for the determination of fluoride by means of a fluoride-selective electrode in the concentration range 0.3-10 pp
A picrate ion-selective electrode without inner reference solution and based on bis(triphenylphosphoranylidene)ammonium picrate dissolved in 2-nitrophenyloctyl ether was constructed and its characteristics assessed. With respect to reducing sugar determination in Port wine, a tubular electrode based