The premixed CgN#2 flame has been stabilized in the IO mm Hg pressure range, its emission spectra recorded between 2,500 and 8,OOG A, and its bumi.ng wiocity measured. The spectrum consists, for the most put, of the C-N red and violet systems, The orJy other emissions characteristic of the flame wer
The emission spectra of the premixed methane-fluorine flame
β Scribed by M. Vanpee; K.D. Cashin; R.J. Mainiero
- Publisher
- Elsevier Science
- Year
- 1978
- Tongue
- English
- Weight
- 585 KB
- Volume
- 31
- Category
- Article
- ISSN
- 0010-2180
No coin nor oath required. For personal study only.
β¦ Synopsis
Premixed flames of methane with fluorine have been stabilized in the pressure range from 3 to 10 torr for the purpose of investigating their emission spectra. The flame spectra reveal the presence of three distinct continua: the C a continuum; a continuum in the region from 250 to 340 nm, very likely due to the recombination of the fluorine atoms; and a continous emission due to carbon particles. The bands observed include those of CH, C2, and OH, the latter being due to oxygen impurities in the fluorine supply. Although the dominant flame radiation was due to C 8 emission the discrete Swings bands of C 3 could not be identified in these premixed flames. Spectral radiances of the above emissions were obtained for various feed compositions within the limit of flame stability. These measurements revealed that the C 2 band emission intensity was proportional to the 1.6 power of that of CH, giving supporting evidence for the formation of C 2 by the reactions, CH
π SIMILAR VOLUMES
Lean methane/air premixed flames are studied numerically, using a detailed chemical model of 74 reaction steps with 28 species, to investigate the flame interaction between two stretched premixed flames with unequal intensities in a counterflow. The finite difference method, time integration and mod
Frequency spectra for scalar (progress variable ~) and two velocity components in premixed methane-air turbulent vflames and stagnation flow-stabilized flames have been measured using laser light Mie scattering and laser Doppler anemometry techniques. To assist in interpreting the influence of flame