✦ LIBER ✦

THE EFFECTS OF MEAN STRESS AND STRESS CONCENTRATION ON FATIGUE UNDER COMBINED BENDING AND TWISTING

✍ Scribed by D. L. McDiarmid

Book ID: 109012036
Publisher: John Wiley and Sons
Year: 1985
Tongue: English
Weight: 492 KB
Volume: 8
Category: Article
ISSN: 8756-758X
DOI: 10.1111/j.1460-2695.1985.tb00415.x

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Effects of residual stresses on fatigue

Effects of residual stresses on fatigue resistance in torsion with bending in the presence of stress concentrations

✍ S. I. Ivanov; V. F. Pavlov; Yu. I. Kol'tsun 📂 Article 📅 1992 🏛 Springer 🌐 English ⚖ 192 KB

A CRITERION FOR FATIGUE DAMAGE UNDER COM

A CRITERION FOR FATIGUE DAMAGE UNDER COMBINED BENDING AND TORSION BASED ON THE LOCAL STRESS-STRAIN METHOD

✍ Nie Hong; Qiao Xin; Fan Weixiun 📂 Article 📅 1992 🏛 John Wiley and Sons 🌐 English ⚖ 127 KB

Effect of mean stress on cyclic stress-s

Effect of mean stress on cyclic stress-strain response and high cycle fatigue life

✍ P. Lukáš; L. Kunz 📂 Article 📅 1989 🏛 Elsevier Science 🌐 English ⚖ 325 KB

Static and fatigue strength of unidirect

Static and fatigue strength of unidirectional composites under the combined effect of shear stress and transverse tension-compression stresses

✍ V. G. Perevozchikov; V. A. Limonov; V. D. Protasov; V. P. Tamuzh 📂 Article 📅 1989 🏛 Springer US 🌐 English ⚖ 562 KB

The effect of mean stress on delay in fa

The effect of mean stress on delay in fatigue crack growth under load stepdown

✍ D.L. McDiarmid; W. Choy; T.M. Lee 📂 Article 📅 1984 🏛 Elsevier Science 🌐 English ⚖ 415 KB

Effects of pressure-sensitive yielding o

Effects of pressure-sensitive yielding on stress distributions in crankshaft sections under fillet rolling and bending fatigue tests

✍ K.S. Choi; J. Pan 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 636 KB

In this paper, the evolution equation for the active yield surface during the unloading/reloading process based on the Drucker-Prager yield function and a recently developed anisotropic hardening rule is first presented. A user material subroutine based on the anisotropic hardening rule and the cons