𝔖 Bobbio Scriptorium
✦   LIBER   ✦

The effects of laser welding parameters on the microstructure of ferritic and duplex stainless steels welds

✍ Scribed by J. Pekkarinen; V. Kujanpää

Publisher
Elsevier
Year
2010
Tongue
English
Weight
504 KB
Volume
5
Category
Article
ISSN
1875-3892

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Effect of laser welding parameters on fu
Effect of laser welding parameters on fusion zone morphological, mechanical and microstructural characteristics of AISI 304 stainless steel
✍ S. Çelen; S. Karadeniz; H. Özden 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 447 KB

## Abstract Nowadays, the Nd:YAG laser has been a promising key tool for joining thin components. In this research, mechanical and microstructural properties of laser welded thin austenitic stainless steel sheets were investigated with experimental investigations, as a function of laser welding par

Effects of alloying elements on the ther
Effects of alloying elements on the thermal fatigue properties of the ferritic stainless steel weld HAZ
✍ Daehee Oh; Kyutae Han; Seunggab Hong; Changhee Lee 📂 Article 📅 2011 🏛 Elsevier 🌐 English ⚖ 449 KB

In the present study, the effects of the addition of Nb, W, and V alloying elements on the thermal fatigue properties of the ferritic stainless steel weld heat affected zone (HAZ) were investigated. Simulation of the weld HAZ and thermal fatigue testing were carried out using a metal thermal cycle s

Effect of welding structure and δ-ferrit
Effect of welding structure and δ-ferrite on fatigue properties for TIG welded austenitic stainless steels at cryogenic temperatures
✍ Tetsumi Yuri; Toshio Ogata; Masahiro Saito; Yoshiaki Hirayama 📂 Article 📅 2000 🏛 Elsevier Science 🌐 English ⚖ 1005 KB

High-cycle and low-cycle fatigue properties of base and weld metals for SUS304L and SUS316L and the eects of welding structure and d-ferrite on fatigue properties were investigated at cryogenic temperatures in order to evaluate the long-life reliability of the structural materials to be used in liqu

Nominal stress range fatigue of stainles
Nominal stress range fatigue of stainless steel fillet welds — the effect of weld size
✍ Kari E. Lahti; Hannu Hänninen; Erkki Niemi 📂 Article 📅 2000 🏛 Elsevier Science 🌐 English ⚖ 669 KB

Three-point bending nominal stress range fatigue of stainless steel fillet welds was tested using two stainless steel grades: ferritic-martensitic EN 1.4003 and austenitic EN 1.4310. The test results obtained were shown to be in good agreement with suggested fatigue classes in the Eurocode 3 design