𝔖 Bobbio Scriptorium
✦   LIBER   ✦

The effect of volume fraction on the coarsening behavior of γ′ in Co-Ni-Cr-Ti Alloys

✍ Scribed by D.W. Chung; M.C. Chaturvedi

Publisher
Elsevier Science
Year
1975
Weight
374 KB
Volume
8
Category
Article
ISSN
0026-0800

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Effect of carbide volume fraction on the
Effect of carbide volume fraction on the oxidation of austenitic Fe-Cr-C alloys
✍ L. B. Susanto; D. J. Young 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 German ⚖ 755 KB

A series of Fe-15Cr-(2-3)Mo alloys (compositions in weight percent) was produced with different carbon concentrations, to control the distribution of chromium between matrix metal and M 23 C 6 precipitates. The alloys were oxidized in the austenitic state at 850 C in pure oxygen, with and without a

Effect of chemical composition on the co
Effect of chemical composition on the corrosion behavior of Ni-Cr-Mo dental casting alloys
✍ Huang, Her-Hsiung 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 910 KB

## Abstract The objective of this investigation was to study the compositional influence on the corrosion behavior of Ni‐Cr‐Mo dental casting alloys in acidic artificial saliva. Cyclic potentiodynamic and potentiostatic tests were used to evaluate the corrosion behavior of different Ni‐Cr‐Mo dental

Effect of copper addition on the superel
Effect of copper addition on the superelastic behavior of Ni-Ti shape memory alloys for orthodontic applications
✍ Gil, F. J. ;Planell, J. A. 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 183 KB 👁 2 views

Transformation temperatures and mechanical properties such as transformation stresses at different temperatures, superelasticity characteristics, and load cycling behavior have been investigated in NiTiCu orthodontic archwires with various copper concentrations. The results have been compared with t

The effect of porous coating processing
The effect of porous coating processing on the corrosion behavior of cast Co–Cr–Mo surgical implant alloys
✍ Dr. J. J. Jacobs; R. M. Latanision; R. M. Rose; S. J. Veeck 📂 Article 📅 1990 🏛 Elsevier Science 🌐 English ⚖ 795 KB

## Abstract The manufacture of porous coated cobalt‐based surgical implant alloys requires sintering–a high temperature process above the incipient melting temperature of this alloy system. The metallurgical changes produced by the high temperature sinter cycle consist of dissolution of interdendri