✦ LIBER ✦

The effect of tool nose radius in ultrasonic vibration cutting of hard metal

✍ Scribed by M. Xiao; K. Sato; S. Karube; T. Soutome

Book ID: 108458122
Publisher: Elsevier Science
Year: 2003
Tongue: English
Weight: 635 KB
Volume: 43
Category: Article
ISSN: 0890-6955
DOI: 10.1016/s0890-6955(03)00129-9

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

The effect of tool geometry on regenerat

The effect of tool geometry on regenerative instability in ultrasonic vibration cutting

✍ M. Xiao; Q.M. Wang; K. Sato; S. Karube; T. Soutome; H. Xu 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 346 KB

Effect of tool nose radius on the stabil

Effect of tool nose radius on the stability of turning processes

✍ M. Rahman; M.A. Matin 📂 Article 📅 1991 🏛 Elsevier Science 🌐 English ⚖ 343 KB

A study of the effect of tool cutting ed

A study of the effect of tool cutting edge radius on ductile cutting of silicon wafers

✍ K. Liu; X. P. Li; M. Rahman; K. S. Neo; X. D. Liu 📂 Article 📅 2006 🏛 Springer 🌐 English ⚖ 404 KB

Ultrasonics in metal-cutting research: M

Ultrasonics in metal-cutting research: Measurement of the chip-tool contact length

📂 Article 📅 1971 🏛 Elsevier Science 🌐 English ⚖ 302 KB

Effect of Cutting Conditions on Tool Per

Effect of Cutting Conditions on Tool Performance in CBN Hard Turning

✍ Yong Huang; Steven Y. Liang 📂 Article 📅 2005 🏛 Society of Manufacturing Engineers 🌐 English ⚖ 167 KB

Cubic boron nitride (CBN) cutting tools are commonly used for single-point turning of hardened materials. Their performance is of importance for hard turning to be a viable technology in view of the high cost of CBN cutting tools and the cost of downtime for tool change. Based on the calibrated tool

Instrument for measuring the radius of r

Instrument for measuring the radius of round-off of the cutting edges of cutting tools and hard alloy plates

✍ V. N. Chizhov; I. M. Petrovskaya; Yu. P. Trykov; A. E. Volkov 📂 Article 📅 1990 🏛 Springer US 🌐 English ⚖ 262 KB