𝔖 Bobbio Scriptorium
✦   LIBER   ✦

The effect of the melt spinning processing parameters on the martensitic transformation in Ti50–Ni35–Cu15 shape memory alloys

✍ Scribed by Yeon-Wook Kim; Tae-Hyun Nam


Book ID
113895159
Publisher
Elsevier Science
Year
2004
Tongue
English
Weight
393 KB
Volume
51
Category
Article
ISSN
1359-6462

No coin nor oath required. For personal study only.


📜 SIMILAR VOLUMES


Influence of iridium on the martensitic
✍ Ch Somsen; J Khalil-Allafi; E.P George 📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 433 KB

In the binary system Ni-Ir it is known that Ni and Ir form a complete solid solution over the entire composition range. Starting from this, Ni 48.5-x Ti 51.5 Ir x alloys with x = 0, 2.5, 5 and 10 at.% and a Ni 49.5 Ti 48 Ir 2.5 alloy have been prepared by arc melting in an argon atmosphere in order

The effect of the melt spinning processi
✍ Yeon-wook Kim; Young-mok Yun; Tae-hyun Nam 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 335 KB

Solidification structures and shape memory characteristics of Ti-30 at.% Ni-20 at.% Cu alloy ribbons prepared by melt spinning were investigated by means of differential scanning calorimetry and X-ray diffraction. In these experiments particular attention has been paid to change the ejection tempera

The influence of coherent ticu plate-lik
✍ H. Rösner; P. Schloßmacher; A.V. Shelyakov; A.M. Glezer 📂 Article 📅 2001 🏛 Elsevier Science 🌐 English ⚖ 358 KB

Amorphous melt-spun ribbons with the composition Ti 50 Ni 25 Cu 25 were heat-treated for various times above, near or below the crystallization temperature in order to achieve three different states concerning the quantity of precipitates. In detail: homogenized material without precipitates as well