๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

The effect of radiation dose on the tensile and impact toughness of highly cross-linked and remelted ultrahigh-molecular weight polyethylenes

โœ Scribed by J Caitlin Huot; Douglas W. Van Citters; John H. Currier; John P. Collier


Publisher
John Wiley and Sons
Year
2011
Tongue
English
Weight
348 KB
Volume
97B
Category
Article
ISSN
1552-4973

No coin nor oath required. For personal study only.

โœฆ Synopsis


Abstract

Several highly crossโ€linked and remelted ultrahighโ€molecular weight polyethylenes (UHMWPE) were introduced in 1998 as bearing materials for orthopaedic implants to achieve superior wear performance. However, gamma radiation and the subsequent postirradiation thermal treatment are associated with decreased mechanical properties such as ductility, toughness, and fatigue strength compared to noncrossโ€linked materials. The purpose of this study was (a) to characterize the toughness (tensile and impact) of highly crossโ€linked and remelted UHMWPE of varying doses (0โ€“255 kGy) and (b) determine whether a correlation exists between both toughness measures. As radiation dose increased, tensile toughness and impact toughness were shown to decrease in a nonlinear fashion; largely a result of the decrease in ductility, which was also observed. Impact toughness and tensile toughness were also found to be strongly correlated to one another (R^2^ = 0.97). ยฉ 2011 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2011.


๐Ÿ“œ SIMILAR VOLUMES


Rate effects on the microindentation-bas
โœ Gilbert, Jeremy L. ;Merkhan, Imad ๐Ÿ“‚ Article ๐Ÿ“… 2004 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 281 KB

## Abstract The surface micromechanical properties of ultrahighโ€molecularโ€weight polyethylene (UHMWPE) are critical in determining the wear, deformation, and fracture in the surface region. These properties have not been accessible to simple mechanical testing on a spatial scale relevant to these m

Effect of zone drawing accompanied with
โœ Sung Soo Han; Won Sik Yoon; Jin Hyun Choi; Sang Yong Kim; Byung Chul Ji; Won Seo ๐Ÿ“‚ Article ๐Ÿ“… 1997 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 282 KB ๐Ÿ‘ 2 views

To enhance the thermal properties of ultrahigh molecular weight (UHMW) (viscosity-average molecular weight of 6 1 10 6 ) polyethylene (PE) gel film, this was crosslinked by dicumyl peroxide (DCP) during a high-temperature zone drawing, which is effective to orient film. Through a series of experimen