𝔖 Bobbio Scriptorium
✦   LIBER   ✦

The effect of particle concentration on the rheology of polydimethylsiloxane filled with fumed silica

✍ Scribed by L. E. Kosinski; J. M. Caruthers


Publisher
John Wiley and Sons
Year
1986
Tongue
English
Weight
703 KB
Volume
32
Category
Article
ISSN
0021-8995

No coin nor oath required. For personal study only.

✦ Synopsis


The effects of particle concentration on the shear-ratedependent viscosity, stress relaxation, and stress growth function were investigated for various molecular weight polydimethylsiloxane (PDMS) fluids filled with colloidal fumed silica. Shear-ratedependent stress relaxation was observed for all dispersions, and a significant stress growth overshoot was observed when the PDMS molecular weight was just greater than the entanglement molecular weight. The rate of stress-relaxation and the type of stress growth are primarily determined by the previous shear rate history and the PDMS molecular weight, while particle concentration only affects the quantitative details of the filled fluid's rheology. The observed effects of particle concentration are consistent with a molecular deformation process, where the silica particles interact via the entanglements of the polymer adsorbed on the surface of the fumed silica.


πŸ“œ SIMILAR VOLUMES


Effects of sodium sulfate concentration
✍ Fevziye AkΓΆz; Fikret TΓΌrker; Sema Koral; Nabi YΓΌzer πŸ“‚ Article πŸ“… 1995 πŸ› Elsevier Science 🌐 English βš– 716 KB

An investigation was carried out on the effect of sodium sulfate concentration on the sulfate resistance of mortars. Experiments were carried out on the RILEM portland cement standard mortars and portland cement-silica tie mortars. Sulfate exposure of mortars were initiated after 28 days of lime sat

The Effect of Particle Matrix Adhesion o
✍ Tim J. Wooster; Simmi Abrol; Jeffrey M. Hey; Douglas R. MacFarlane πŸ“‚ Article πŸ“… 2004 πŸ› John Wiley and Sons 🌐 English βš– 227 KB

## Abstract **Summary:** The effect of silica and its surface treatment on the mechanical properties of composites was studied as part of the evaluation of cyanate ester matrices as potential electronic encapsulants. Three filler surface treatments were used, as a qualitative interfacial adhesion s

Effect of Particle Size Distribution on
✍ Paul F. Luckham; Michael A. Ukeje πŸ“‚ Article πŸ“… 1999 πŸ› Elsevier Science 🌐 English βš– 163 KB

The rheological properties of aqueous polystyrene latex dispersions from three synthetic batches, with nearly the same z-average particle sizes, 400 nm, but varying degrees of polydispersity, 0.085, 0.301, and 0.485, respectively, were systematically investigated using steady-state shear and oscilla

Effect of particle size on the rheology
✍ Olusola B. Adeyinka; Sepideh Samiei; Zhenghe Xu; Jacob H. Masliyah πŸ“‚ Article πŸ“… 2009 πŸ› John Wiley and Sons 🌐 English βš– 788 KB

## Abstract The success of the separation process conventionally used in Alberta for oil sands extraction is highly influenced by the rheology of the oil sands slurry. In the gravity separation vessel, high slurry viscosities can hinder the rise of aerated bitumen and reduce the efficiency of the r

Effect of floc concentration on the rheo
✍ Wendy AM McMinn; James Keown; Stephen J Allen; Michael G Burnett πŸ“‚ Article πŸ“… 2004 πŸ› Wiley (John Wiley & Sons) 🌐 English βš– 120 KB πŸ‘ 1 views

## Abstract The primary interest of this work is to determine the effect of floc concentration on ferric floc particle interactions and hence, rheology. In accordance with established theory, ferric floc viscosity exhibits a non‐linear increase with solids content, with the viscosity increasing sha