๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

The effect of orientation on U-shaped grooved and sintered wick heat pipes

โœ Scribed by M.K. Russel; C. Young; J.S. Cotton; C.Y. Ching

Publisher
Elsevier Science
Year
2011
Tongue
English
Weight
569 KB
Volume
31
Category
Article
ISSN
1359-4311

No coin nor oath required. For personal study only.

๐Ÿ“œ SIMILAR VOLUMES

Effect of nanofluids on the thermal perf
Effect of nanofluids on the thermal performance of a flat micro heat pipe with a rectangular grooved wick
โœ Kyu Hyung Do; Seok Pil Jang ๐Ÿ“‚ Article ๐Ÿ“… 2010 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 673 KB

In this paper, the effect of water-based Al 2 O 3 nanofluids as working fluid on the thermal performance of a flat micro-heat pipe with a rectangular grooved wick is investigated. For the purpose, the axial variations of the wall temperature, the evaporation and condensation rates are considered by

Analytical and experimental investigatio
Analytical and experimental investigation on the operational characteristics and the thermal optimization of a miniature heat pipe with a grooved wick structure
โœ Sung Jin Kim; Joung Ki Seo; Kyu Hyung Do ๐Ÿ“‚ Article ๐Ÿ“… 2003 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 285 KB

A mathematical model for heat and mass transfer in a miniature heat pipe with a grooved wick structure is developed and solved analytically to yield the maximum heat transport rate and the overall thermal resistance under steady-state conditions. The effects of the liquid-vapor interfacial shear str

Effect of stress relief groove on fretti
Effect of stress relief groove on fretting fatigue strength and index for the selection of optimal groove shape
โœ Masanobu Kubota; Shunsuke Kataoka; Yoshiyuki Kondo ๐Ÿ“‚ Article ๐Ÿ“… 2009 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 439 KB

The applicability of small stress relief groove for the improvement of fretting fatigue strength was studied. Fretting fatigue tests were done using several kinds of grooved specimens. The shape of groove was systematically changed with parameters of groove radius R and tangential angle h. The impro