The effect of moisture on the dielectric behavior of poly(vinyl acetate)–natural rubber blend
✍ Scribed by Michael S. Chuu; Raymond R. Meyers
- Publisher
- John Wiley and Sons
- Year
- 1987
- Tongue
- English
- Weight
- 548 KB
- Volume
- 34
- Category
- Article
- ISSN
- 0021-8995
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
## Abstract Blends of styrene–butadiene rubber (SBR) and poly(ethylene‐__co__‐vinyl acetate) (EVA) with different ratios were prepared with a two‐roll mixing mill and were vulcanized by three different crosslinking systems, namely, sulfur (S), dicumyl peroxide, and a mixture consisting of S and per
The effect of prevulcanization on the rheological behavior of natural rubber (NR), styrene butadiene rubber (SBR) latices, and their blends was studied with special reference to shear rate, blend ratio, vulcanizing systems, prevulcanization time, and accelerator systems. The NR latex showed a sharp
Poly(vinyl acetate) (PVAc)/poly(ethylene oxide) (PEO) blends were prepared by casting from either benzene or chloroform. The solvent effects on the crystallization behavior and thermodynamic properties of the blends were studied by the differential scanning calorimeter (DSC). Two grades of PEO with
Brabender-mixed blends of poly(acrylic acid) (PAA) and epoxidized natural rubber (ENR) were extruded through the capillary in a Monsanto processability tester, and the capillary pressure versus extrusion time plots were recorded. Constancy in capillary pressure with extrusion time was observed in th